{"title":"Draft Inducer Motors","description":"\u003cp\u003eThe draft inducer pulls combustion gases through the heat exchanger and out the vent, and it runs before the burners light so the pressure switch can prove draft.\u003c\/p\u003e\u003cp\u003eSymptoms: nothing at all happens on a call for heat, a loud grinding or squealing from the top of the furnace, or a furnace that starts the inducer and then locks out because the pressure switch never closes. Check the pressure switch hose for water and blockage before condemning the motor.\u003c\/p\u003e\u003cp class=\"fd-coll-terms\"\u003eShips the same business day on orders placed by 2 PM CT. 7-day returns on parts. Not sure which one you need? Call \u003cstrong\u003e(888) 762-1334\u003c\/strong\u003e — we are licensed HVAC contractors (Hamlin Mechanical LLC, MN Lic. #128688) and we would rather talk you out of the wrong part than sell it to you.\u003c\/p\u003e","products":[{"product_id":"draft-inducer-motor-1003441","title":"Draft Inducer Motor | 1003441","description":"\u003cp\u003e\u003cstrong\u003eDraft Inducer Motor\u003c\/strong\u003e — manufacturer part number \u003cstrong\u003e1003441\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat this part does\u003c\/h2\u003e\u003cp\u003eThe draft inducer pulls combustion gases through the heat exchanger and out the flue, and creates the vacuum the pressure switch needs to prove before the gas valve opens. When it fails, the furnace will not light at all.\u003c\/p\u003e\n\u003ch2\u003eReplace this part if\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLoud grinding, squealing, or rattling at start-up\u003c\/li\u003e\n\u003cli\u003eInducer does not spin when the thermostat calls\u003c\/li\u003e\n\u003cli\u003eBoard flashes a pressure-switch code because no vacuum is developed\u003c\/li\u003e\n\u003cli\u003eWheel is cracked, loose, or clogged with debris\u003c\/li\u003e\n\u003cli\u003eMotor is hot to the touch or smells burnt\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e1003441\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold By\u003c\/th\u003e\n\u003ctd\u003eFurnace Direct (Hamlin Mechanical LLC, MN Lic. #128688)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstall difficulty\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eModerate\u003c\/strong\u003e — about 60 minutes. Tools: Nut driver, screwdriver, phone camera for wiring. Power off at the breaker: yes. Gas shutoff required: no.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety warning:\u003c\/strong\u003e Photograph the wiring and the gasket orientation before removal. A poorly seated inducer gasket leaks combustion gas into the space around the furnace.\u003c\/p\u003e\n\u003cp\u003eTypical service life is 10-15 years.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I know if my draft inducer motor is bad?\u003c\/h3\u003e\u003cp\u003eReplace it if you see any of these: loud grinding, squealing, or rattling at start-up; inducer does not spin when the thermostat calls; board flashes a pressure-switch code because no vacuum is developed.\u003c\/p\u003e\n\u003ch3\u003eCan I replace a draft inducer motor myself?\u003c\/h3\u003e\u003cp\u003eYes. This is a moderate repair that takes about 60 minutes with nut driver, screwdriver, phone camera for wiring. Always shut the power off at the breaker first. Photograph the wiring and the gasket orientation before removal. A poorly seated inducer gasket leaks combustion gas into the space around the furnace.\u003c\/p\u003e\n\u003ch3\u003eHow long does a draft inducer motor last?\u003c\/h3\u003e\u003cp\u003eTypically 10-15 years in normal residential use. Heavy cycling, poor airflow, and dirty filters all shorten that.\u003c\/p\u003e\n\n\u003ch3\u003eWhat if it does not fit?\u003c\/h3\u003e\u003cp\u003eReturn it within 7 days of delivery. If you are unsure before ordering, call (888) 762-1334 — we are licensed HVAC contractors and can confirm the right part for your model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold by licensed HVAC contractors.\u003c\/strong\u003e Furnace Direct is Hamlin Mechanical LLC, Minnesota licence #128688. If this part does not fix the problem, call (888) 762-1334 and we will help you work out what will.\u003c\/p\u003e","brand":"Airtemp","offers":[{"title":"Default Title","offer_id":58271395053871,"sku":"1003441","price":395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/2111\/2367\/files\/1003441.jpg?v=1789338852"},{"product_id":"draft-inducer-motor-903162","title":"Draft Inducer Motor | 903162","description":"\u003cp\u003e\u003cstrong\u003eDraft Inducer Motor\u003c\/strong\u003e — manufacturer part number \u003cstrong\u003e903162\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat this part does\u003c\/h2\u003e\u003cp\u003eThe draft inducer pulls combustion gases through the heat exchanger and out the flue, and creates the vacuum the pressure switch needs to prove before the gas valve opens. When it fails, the furnace will not light at all.\u003c\/p\u003e\n\u003ch2\u003eReplace this part if\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLoud grinding, squealing, or rattling at start-up\u003c\/li\u003e\n\u003cli\u003eInducer does not spin when the thermostat calls\u003c\/li\u003e\n\u003cli\u003eBoard flashes a pressure-switch code because no vacuum is developed\u003c\/li\u003e\n\u003cli\u003eWheel is cracked, loose, or clogged with debris\u003c\/li\u003e\n\u003cli\u003eMotor is hot to the touch or smells burnt\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e903162\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold By\u003c\/th\u003e\n\u003ctd\u003eFurnace Direct (Hamlin Mechanical LLC, MN Lic. #128688)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstall difficulty\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eModerate\u003c\/strong\u003e — about 60 minutes. Tools: Nut driver, screwdriver, phone camera for wiring. Power off at the breaker: yes. Gas shutoff required: no.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety warning:\u003c\/strong\u003e Photograph the wiring and the gasket orientation before removal. A poorly seated inducer gasket leaks combustion gas into the space around the furnace.\u003c\/p\u003e\n\u003cp\u003eTypical service life is 10-15 years.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I know if my draft inducer motor is bad?\u003c\/h3\u003e\u003cp\u003eReplace it if you see any of these: loud grinding, squealing, or rattling at start-up; inducer does not spin when the thermostat calls; board flashes a pressure-switch code because no vacuum is developed.\u003c\/p\u003e\n\u003ch3\u003eCan I replace a draft inducer motor myself?\u003c\/h3\u003e\u003cp\u003eYes. This is a moderate repair that takes about 60 minutes with nut driver, screwdriver, phone camera for wiring. Always shut the power off at the breaker first. Photograph the wiring and the gasket orientation before removal. A poorly seated inducer gasket leaks combustion gas into the space around the furnace.\u003c\/p\u003e\n\u003ch3\u003eHow long does a draft inducer motor last?\u003c\/h3\u003e\u003cp\u003eTypically 10-15 years in normal residential use. Heavy cycling, poor airflow, and dirty filters all shorten that.\u003c\/p\u003e\n\n\u003ch3\u003eWhat if it does not fit?\u003c\/h3\u003e\u003cp\u003eReturn it within 7 days of delivery. If you are unsure before ordering, call (888) 762-1334 — we are licensed HVAC contractors and can confirm the right part for your model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold by licensed HVAC contractors.\u003c\/strong\u003e Furnace Direct is Hamlin Mechanical LLC, Minnesota licence #128688. If this part does not fix the problem, call (888) 762-1334 and we will help you work out what will.\u003c\/p\u003e","brand":"Airtemp","offers":[{"title":"Default Title","offer_id":58271395086639,"sku":"903162","price":415.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/2111\/2367\/files\/draft-inducer-motor-903162-1.jpg?v=1789339019"},{"product_id":"draft-inducer-motor-a066","title":"Draft Inducer Motor | A066","description":"\u003cp\u003e\u003cstrong\u003eDraft Inducer Motor\u003c\/strong\u003e — manufacturer part number \u003cstrong\u003eA066\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat this part does\u003c\/h2\u003e\u003cp\u003eThe draft inducer pulls combustion gases through the heat exchanger and out the flue, and creates the vacuum the pressure switch needs to prove before the gas valve opens. When it fails, the furnace will not light at all.\u003c\/p\u003e\n\u003ch2\u003eReplace this part if\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLoud grinding, squealing, or rattling at start-up\u003c\/li\u003e\n\u003cli\u003eInducer does not spin when the thermostat calls\u003c\/li\u003e\n\u003cli\u003eBoard flashes a pressure-switch code because no vacuum is developed\u003c\/li\u003e\n\u003cli\u003eWheel is cracked, loose, or clogged with debris\u003c\/li\u003e\n\u003cli\u003eMotor is hot to the touch or smells burnt\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eA066\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold By\u003c\/th\u003e\n\u003ctd\u003eFurnace Direct (Hamlin Mechanical LLC, MN Lic. #128688)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstall difficulty\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eModerate\u003c\/strong\u003e — about 60 minutes. Tools: Nut driver, screwdriver, phone camera for wiring. Power off at the breaker: yes. Gas shutoff required: no.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety warning:\u003c\/strong\u003e Photograph the wiring and the gasket orientation before removal. A poorly seated inducer gasket leaks combustion gas into the space around the furnace.\u003c\/p\u003e\n\u003cp\u003eTypical service life is 10-15 years.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I know if my draft inducer motor is bad?\u003c\/h3\u003e\u003cp\u003eReplace it if you see any of these: loud grinding, squealing, or rattling at start-up; inducer does not spin when the thermostat calls; board flashes a pressure-switch code because no vacuum is developed.\u003c\/p\u003e\n\u003ch3\u003eCan I replace a draft inducer motor myself?\u003c\/h3\u003e\u003cp\u003eYes. This is a moderate repair that takes about 60 minutes with nut driver, screwdriver, phone camera for wiring. Always shut the power off at the breaker first. Photograph the wiring and the gasket orientation before removal. A poorly seated inducer gasket leaks combustion gas into the space around the furnace.\u003c\/p\u003e\n\u003ch3\u003eHow long does a draft inducer motor last?\u003c\/h3\u003e\u003cp\u003eTypically 10-15 years in normal residential use. Heavy cycling, poor airflow, and dirty filters all shorten that.\u003c\/p\u003e\n\n\u003ch3\u003eWhat if it does not fit?\u003c\/h3\u003e\u003cp\u003eReturn it within 7 days of delivery. If you are unsure before ordering, call (888) 762-1334 — we are licensed HVAC contractors and can confirm the right part for your model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold by licensed HVAC contractors.\u003c\/strong\u003e Furnace Direct is Hamlin Mechanical LLC, Minnesota licence #128688. If this part does not fix the problem, call (888) 762-1334 and we will help you work out what will.\u003c\/p\u003e","brand":"Regal Rexnord","offers":[{"title":"Default Title","offer_id":58271395119407,"sku":"A066","price":415.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/2111\/2367\/files\/A066.jpg?v=1785719634"},{"product_id":"draft-inducer-motor-dj-3","title":"Draft Inducer Motor | DJ-3","description":"\u003cp\u003e\u003cstrong\u003eDraft Inducer Motor\u003c\/strong\u003e — manufacturer part number \u003cstrong\u003eDJ-3\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat this part does\u003c\/h2\u003e\u003cp\u003eThe draft inducer pulls combustion gases through the heat exchanger and out the flue, and creates the vacuum the pressure switch needs to prove before the gas valve opens. When it fails, the furnace will not light at all.\u003c\/p\u003e\n\u003ch2\u003eReplace this part if\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLoud grinding, squealing, or rattling at start-up\u003c\/li\u003e\n\u003cli\u003eInducer does not spin when the thermostat calls\u003c\/li\u003e\n\u003cli\u003eBoard flashes a pressure-switch code because no vacuum is developed\u003c\/li\u003e\n\u003cli\u003eWheel is cracked, loose, or clogged with debris\u003c\/li\u003e\n\u003cli\u003eMotor is hot to the touch or smells burnt\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eDJ-3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold By\u003c\/th\u003e\n\u003ctd\u003eFurnace Direct (Hamlin Mechanical LLC, MN Lic. #128688)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstall difficulty\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eModerate\u003c\/strong\u003e — about 60 minutes. Tools: Nut driver, screwdriver, phone camera for wiring. Power off at the breaker: yes. Gas shutoff required: no.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety warning:\u003c\/strong\u003e Photograph the wiring and the gasket orientation before removal. A poorly seated inducer gasket leaks combustion gas into the space around the furnace.\u003c\/p\u003e\n\u003cp\u003eTypical service life is 10-15 years.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I know if my draft inducer motor is bad?\u003c\/h3\u003e\u003cp\u003eReplace it if you see any of these: loud grinding, squealing, or rattling at start-up; inducer does not spin when the thermostat calls; board flashes a pressure-switch code because no vacuum is developed.\u003c\/p\u003e\n\u003ch3\u003eCan I replace a draft inducer motor myself?\u003c\/h3\u003e\u003cp\u003eYes. This is a moderate repair that takes about 60 minutes with nut driver, screwdriver, phone camera for wiring. Always shut the power off at the breaker first. Photograph the wiring and the gasket orientation before removal. A poorly seated inducer gasket leaks combustion gas into the space around the furnace.\u003c\/p\u003e\n\u003ch3\u003eHow long does a draft inducer motor last?\u003c\/h3\u003e\u003cp\u003eTypically 10-15 years in normal residential use. Heavy cycling, poor airflow, and dirty filters all shorten that.\u003c\/p\u003e\n\n\u003ch3\u003eWhat if it does not fit?\u003c\/h3\u003e\u003cp\u003eReturn it within 7 days of delivery. If you are unsure before ordering, call (888) 762-1334 — we are licensed HVAC contractors and can confirm the right part for your model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold by licensed HVAC contractors.\u003c\/strong\u003e Furnace Direct is Hamlin Mechanical LLC, Minnesota licence #128688. If this part does not fix the problem, call (888) 762-1334 and we will help you work out what will.\u003c\/p\u003e","brand":"Tjernlund","offers":[{"title":"Default Title","offer_id":58271395152175,"sku":"DJ-3","price":385.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/2111\/2367\/files\/DJ-3.jpg?v=1785719635"},{"product_id":"draft-inducer-motor-go0171m000018s","title":"Draft Inducer Motor | GO0171M000018S","description":"\u003cp\u003e\u003cstrong\u003eDraft Inducer Motor\u003c\/strong\u003e — manufacturer part number \u003cstrong\u003eGO0171M000018S\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat this part does\u003c\/h2\u003e\u003cp\u003eThe draft inducer pulls combustion gases through the heat exchanger and out the flue, and creates the vacuum the pressure switch needs to prove before the gas valve opens. When it fails, the furnace will not light at all.\u003c\/p\u003e\n\u003ch2\u003eReplace this part if\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLoud grinding, squealing, or rattling at start-up\u003c\/li\u003e\n\u003cli\u003eInducer does not spin when the thermostat calls\u003c\/li\u003e\n\u003cli\u003eBoard flashes a pressure-switch code because no vacuum is developed\u003c\/li\u003e\n\u003cli\u003eWheel is cracked, loose, or clogged with debris\u003c\/li\u003e\n\u003cli\u003eMotor is hot to the touch or smells burnt\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eGO0171M000018S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold By\u003c\/th\u003e\n\u003ctd\u003eFurnace Direct (Hamlin Mechanical LLC, MN Lic. #128688)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstall difficulty\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eModerate\u003c\/strong\u003e — about 60 minutes. Tools: Nut driver, screwdriver, phone camera for wiring. Power off at the breaker: yes. Gas shutoff required: no.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety warning:\u003c\/strong\u003e Photograph the wiring and the gasket orientation before removal. A poorly seated inducer gasket leaks combustion gas into the space around the furnace.\u003c\/p\u003e\n\u003cp\u003eTypical service life is 10-15 years.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I know if my draft inducer motor is bad?\u003c\/h3\u003e\u003cp\u003eReplace it if you see any of these: loud grinding, squealing, or rattling at start-up; inducer does not spin when the thermostat calls; board flashes a pressure-switch code because no vacuum is developed.\u003c\/p\u003e\n\u003ch3\u003eCan I replace a draft inducer motor myself?\u003c\/h3\u003e\u003cp\u003eYes. This is a moderate repair that takes about 60 minutes with nut driver, screwdriver, phone camera for wiring. Always shut the power off at the breaker first. Photograph the wiring and the gasket orientation before removal. A poorly seated inducer gasket leaks combustion gas into the space around the furnace.\u003c\/p\u003e\n\u003ch3\u003eHow long does a draft inducer motor last?\u003c\/h3\u003e\u003cp\u003eTypically 10-15 years in normal residential use. Heavy cycling, poor airflow, and dirty filters all shorten that.\u003c\/p\u003e\n\n\u003ch3\u003eWhat if it does not fit?\u003c\/h3\u003e\u003cp\u003eReturn it within 7 days of delivery. If you are unsure before ordering, call (888) 762-1334 — we are licensed HVAC contractors and can confirm the right part for your model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold by licensed HVAC contractors.\u003c\/strong\u003e Furnace Direct is Hamlin Mechanical LLC, Minnesota licence #128688. If this part does not fix the problem, call (888) 762-1334 and we will help you work out what will.\u003c\/p\u003e","brand":"Neuco","offers":[{"title":"Default Title","offer_id":58271395184943,"sku":"GO0171M000018S","price":425.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/2111\/2367\/files\/GO0171M000018S.jpg?v=1789338857"},{"product_id":"draft-inducer-motor-s1-02649692000","title":"Draft Inducer Motor | S1-02649692000","description":"\u003cp\u003e\u003cstrong\u003eDraft Inducer Motor\u003c\/strong\u003e — manufacturer part number \u003cstrong\u003eS1-02649692000\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat this part does\u003c\/h2\u003e\u003cp\u003eThe draft inducer pulls combustion gases through the heat exchanger and out the flue, and creates the vacuum the pressure switch needs to prove before the gas valve opens. When it fails, the furnace will not light at all.\u003c\/p\u003e\n\u003ch2\u003eReplace this part if\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLoud grinding, squealing, or rattling at start-up\u003c\/li\u003e\n\u003cli\u003eInducer does not spin when the thermostat calls\u003c\/li\u003e\n\u003cli\u003eBoard flashes a pressure-switch code because no vacuum is developed\u003c\/li\u003e\n\u003cli\u003eWheel is cracked, loose, or clogged with debris\u003c\/li\u003e\n\u003cli\u003eMotor is hot to the touch or smells burnt\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eS1-02649692000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold By\u003c\/th\u003e\n\u003ctd\u003eFurnace Direct (Hamlin Mechanical LLC, MN Lic. #128688)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstall difficulty\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eModerate\u003c\/strong\u003e — about 60 minutes. Tools: Nut driver, screwdriver, phone camera for wiring. Power off at the breaker: yes. Gas shutoff required: no.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety warning:\u003c\/strong\u003e Photograph the wiring and the gasket orientation before removal. A poorly seated inducer gasket leaks combustion gas into the space around the furnace.\u003c\/p\u003e\n\u003cp\u003eTypical service life is 10-15 years.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I know if my draft inducer motor is bad?\u003c\/h3\u003e\u003cp\u003eReplace it if you see any of these: loud grinding, squealing, or rattling at start-up; inducer does not spin when the thermostat calls; board flashes a pressure-switch code because no vacuum is developed.\u003c\/p\u003e\n\u003ch3\u003eCan I replace a draft inducer motor myself?\u003c\/h3\u003e\u003cp\u003eYes. This is a moderate repair that takes about 60 minutes with nut driver, screwdriver, phone camera for wiring. Always shut the power off at the breaker first. Photograph the wiring and the gasket orientation before removal. A poorly seated inducer gasket leaks combustion gas into the space around the furnace.\u003c\/p\u003e\n\u003ch3\u003eHow long does a draft inducer motor last?\u003c\/h3\u003e\u003cp\u003eTypically 10-15 years in normal residential use. Heavy cycling, poor airflow, and dirty filters all shorten that.\u003c\/p\u003e\n\n\u003ch3\u003eWhat if it does not fit?\u003c\/h3\u003e\u003cp\u003eReturn it within 7 days of delivery. If you are unsure before ordering, call (888) 762-1334 — we are licensed HVAC contractors and can confirm the right part for your model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold by licensed HVAC contractors.\u003c\/strong\u003e Furnace Direct is Hamlin Mechanical LLC, Minnesota licence #128688. If this part does not fix the problem, call (888) 762-1334 and we will help you work out what will.\u003c\/p\u003e","brand":"Source One","offers":[{"title":"Default Title","offer_id":58271395217711,"sku":"S1-02649692000","price":285.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/2111\/2367\/files\/S1-02649692000.jpg?v=1785719638"},{"product_id":"draft-inducer-motor-a157","title":"Draft Inducer Motor | A157","description":"\u003cp\u003e\u003cstrong\u003eDraft Inducer Motor\u003c\/strong\u003e — manufacturer part number \u003cstrong\u003eA157\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat this part does\u003c\/h2\u003e\u003cp\u003eThe draft inducer pulls combustion gases through the heat exchanger and out the flue, and creates the vacuum the pressure switch needs to prove before the gas valve opens. When it fails, the furnace will not light at all.\u003c\/p\u003e\n\u003ch2\u003eReplace this part if\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLoud grinding, squealing, or rattling at start-up\u003c\/li\u003e\n\u003cli\u003eInducer does not spin when the thermostat calls\u003c\/li\u003e\n\u003cli\u003eBoard flashes a pressure-switch code because no vacuum is developed\u003c\/li\u003e\n\u003cli\u003eWheel is cracked, loose, or clogged with debris\u003c\/li\u003e\n\u003cli\u003eMotor is hot to the touch or smells burnt\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eA157\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold By\u003c\/th\u003e\n\u003ctd\u003eFurnace Direct (Hamlin Mechanical LLC, MN Lic. #128688)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstall difficulty\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eModerate\u003c\/strong\u003e — about 60 minutes. Tools: Nut driver, screwdriver, phone camera for wiring. Power off at the breaker: yes. Gas shutoff required: no.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety warning:\u003c\/strong\u003e Photograph the wiring and the gasket orientation before removal. A poorly seated inducer gasket leaks combustion gas into the space around the furnace.\u003c\/p\u003e\n\u003cp\u003eTypical service life is 10-15 years.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I know if my draft inducer motor is bad?\u003c\/h3\u003e\u003cp\u003eReplace it if you see any of these: loud grinding, squealing, or rattling at start-up; inducer does not spin when the thermostat calls; board flashes a pressure-switch code because no vacuum is developed.\u003c\/p\u003e\n\u003ch3\u003eCan I replace a draft inducer motor myself?\u003c\/h3\u003e\u003cp\u003eYes. This is a moderate repair that takes about 60 minutes with nut driver, screwdriver, phone camera for wiring. Always shut the power off at the breaker first. Photograph the wiring and the gasket orientation before removal. A poorly seated inducer gasket leaks combustion gas into the space around the furnace.\u003c\/p\u003e\n\u003ch3\u003eHow long does a draft inducer motor last?\u003c\/h3\u003e\u003cp\u003eTypically 10-15 years in normal residential use. Heavy cycling, poor airflow, and dirty filters all shorten that.\u003c\/p\u003e\n\n\u003ch3\u003eWhat if it does not fit?\u003c\/h3\u003e\u003cp\u003eReturn it within 7 days of delivery. If you are unsure before ordering, call (888) 762-1334 — we are licensed HVAC contractors and can confirm the right part for your model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold by licensed HVAC contractors.\u003c\/strong\u003e Furnace Direct is Hamlin Mechanical LLC, Minnesota licence #128688. If this part does not fix the problem, call (888) 762-1334 and we will help you work out what will.\u003c\/p\u003e","brand":"Regal Rexnord","offers":[{"title":"Default Title","offer_id":58271395250479,"sku":"A157","price":295.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0955\/2111\/2367\/files\/A157.jpg?v=1785719639"}],"url":"https:\/\/furnace.direct\/collections\/draft-inducers\/2-ton+single-stage.oembed","provider":"Furnace Direct","version":"1.0","type":"link"}