{"title":"Furnace Pressure Switches","description":"\u003cp\u003ePressure switches prove the inducer is moving exhaust before the board will open the gas valve. Check the hose and condensate trap before replacing -- a blocked drain is a more common cause.\u003c\/p\u003e","products":[{"product_id":"furnace-pressure-switch-ns2000031","title":"Furnace Pressure Switch | NS2000031","description":"\u003cp\u003e\u003cstrong\u003eFurnace Pressure Switch\u003c\/strong\u003e — manufacturer part number \u003cstrong\u003eNS2000031\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat this part does\u003c\/h2\u003e\u003cp\u003eThe pressure switch proves the inducer is actually moving exhaust before the board will open the gas valve. It senses vacuum through a small hose. Blocked hoses, a blocked flue, or water in the condensate trap all make it fail to close.\u003c\/p\u003e\n\u003ch2\u003eReplace this part if\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eInducer runs but the igniter never glows\u003c\/li\u003e\n\u003cli\u003eBoard flashes a pressure-switch or open-circuit code\u003c\/li\u003e\n\u003cli\u003eFurnace tries repeatedly then locks out\u003c\/li\u003e\n\u003cli\u003eSwitch hose is cracked, kinked, or full of water\u003c\/li\u003e\n\u003cli\u003eSwitch does not click when the inducer starts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eNS2000031\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold By\u003c\/th\u003e\n\u003ctd\u003eFurnace Direct (Hamlin Mechanical LLC, MN Lic. #128688)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstall difficulty\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEasy\u003c\/strong\u003e — about 25 minutes. Tools: Nut driver, screwdriver. Power off at the breaker: yes. Gas shutoff required: no.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety warning:\u003c\/strong\u003e Check the hose and the condensate trap before replacing the switch. A blocked drain is a more common cause than a failed switch, and it costs nothing to clear.\u003c\/p\u003e\n\u003cp\u003eTypical service life is 8-15 years. Most HVAC companies charge $200-400 to replace this part, including the service call.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I know if my furnace pressure switch is bad?\u003c\/h3\u003e\u003cp\u003eReplace it if you see any of these: inducer runs but the igniter never glows; board flashes a pressure-switch or open-circuit code; furnace tries repeatedly then locks out.\u003c\/p\u003e\n\u003ch3\u003eCan I replace a furnace pressure switch myself?\u003c\/h3\u003e\u003cp\u003eYes. This is a easy repair that takes about 25 minutes with nut driver, screwdriver. Always shut the power off at the breaker first. Check the hose and the condensate trap before replacing the switch. A blocked drain is a more common cause than a failed switch, and it costs nothing to clear.\u003c\/p\u003e\n\u003ch3\u003eHow long does a furnace pressure switch last?\u003c\/h3\u003e\u003cp\u003eTypically 8-15 years in normal residential use. Heavy cycling, poor airflow, and dirty filters all shorten that.\u003c\/p\u003e\n\u003ch3\u003eHow much does a contractor charge to replace a furnace pressure switch?\u003c\/h3\u003e\u003cp\u003eMost HVAC companies charge $200-400 for this repair, including the service call. The part itself is $93.95.\u003c\/p\u003e\n\u003ch3\u003eHow fast does this ship?\u003c\/h3\u003e\u003cp\u003eOrders placed by 2 PM CT typically ship the same business day, with delivery in 1-5 business days.\u003c\/p\u003e\n\u003ch3\u003eWhat if it does not fit?\u003c\/h3\u003e\u003cp\u003eReturn it within 90 days. If you are unsure before ordering, call (888) 762-1334 — we are licensed HVAC contractors and can confirm the right part for your model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold by licensed HVAC contractors.\u003c\/strong\u003e Furnace Direct is Hamlin Mechanical LLC, Minnesota licence #128688. If this part does not fix the problem, call (888) 762-1334 and we will help you work out what will.\u003c\/p\u003e","brand":"Furnace Direct","offers":[{"title":"Default Title","offer_id":58271394529583,"sku":"NS2000031","price":93.95,"currency_code":"USD","in_stock":true}]},{"product_id":"furnace-pressure-switch-2374-523","title":"Furnace Pressure Switch | 2374-523","description":"\u003cp\u003e\u003cstrong\u003eFurnace Pressure Switch\u003c\/strong\u003e — manufacturer part number \u003cstrong\u003e2374-523\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat this part does\u003c\/h2\u003e\u003cp\u003eThe pressure switch proves the inducer is actually moving exhaust before the board will open the gas valve. It senses vacuum through a small hose. Blocked hoses, a blocked flue, or water in the condensate trap all make it fail to close.\u003c\/p\u003e\n\u003ch2\u003eReplace this part if\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eInducer runs but the igniter never glows\u003c\/li\u003e\n\u003cli\u003eBoard flashes a pressure-switch or open-circuit code\u003c\/li\u003e\n\u003cli\u003eFurnace tries repeatedly then locks out\u003c\/li\u003e\n\u003cli\u003eSwitch hose is cracked, kinked, or full of water\u003c\/li\u003e\n\u003cli\u003eSwitch does not click when the inducer starts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e2374-523\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold By\u003c\/th\u003e\n\u003ctd\u003eFurnace Direct (Hamlin Mechanical LLC, MN Lic. #128688)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstall difficulty\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEasy\u003c\/strong\u003e — about 25 minutes. Tools: Nut driver, screwdriver. Power off at the breaker: yes. Gas shutoff required: no.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety warning:\u003c\/strong\u003e Check the hose and the condensate trap before replacing the switch. A blocked drain is a more common cause than a failed switch, and it costs nothing to clear.\u003c\/p\u003e\n\u003cp\u003eTypical service life is 8-15 years. Most HVAC companies charge $200-400 to replace this part, including the service call.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I know if my furnace pressure switch is bad?\u003c\/h3\u003e\u003cp\u003eReplace it if you see any of these: inducer runs but the igniter never glows; board flashes a pressure-switch or open-circuit code; furnace tries repeatedly then locks out.\u003c\/p\u003e\n\u003ch3\u003eCan I replace a furnace pressure switch myself?\u003c\/h3\u003e\u003cp\u003eYes. This is a easy repair that takes about 25 minutes with nut driver, screwdriver. Always shut the power off at the breaker first. Check the hose and the condensate trap before replacing the switch. A blocked drain is a more common cause than a failed switch, and it costs nothing to clear.\u003c\/p\u003e\n\u003ch3\u003eHow long does a furnace pressure switch last?\u003c\/h3\u003e\u003cp\u003eTypically 8-15 years in normal residential use. Heavy cycling, poor airflow, and dirty filters all shorten that.\u003c\/p\u003e\n\u003ch3\u003eHow much does a contractor charge to replace a furnace pressure switch?\u003c\/h3\u003e\u003cp\u003eMost HVAC companies charge $200-400 for this repair, including the service call. The part itself is $82.95.\u003c\/p\u003e\n\u003ch3\u003eHow fast does this ship?\u003c\/h3\u003e\u003cp\u003eOrders placed by 2 PM CT typically ship the same business day, with delivery in 1-5 business days.\u003c\/p\u003e\n\u003ch3\u003eWhat if it does not fit?\u003c\/h3\u003e\u003cp\u003eReturn it within 90 days. If you are unsure before ordering, call (888) 762-1334 — we are licensed HVAC contractors and can confirm the right part for your model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold by licensed HVAC contractors.\u003c\/strong\u003e Furnace Direct is Hamlin Mechanical LLC, Minnesota licence #128688. If this part does not fix the problem, call (888) 762-1334 and we will help you work out what will.\u003c\/p\u003e","brand":"Furnace Direct","offers":[{"title":"Default Title","offer_id":58271394562351,"sku":"2374-523","price":82.95,"currency_code":"USD","in_stock":true}]},{"product_id":"furnace-pressure-switch-2374-522","title":"Furnace Pressure Switch | 2374-522","description":"\u003cp\u003e\u003cstrong\u003eFurnace Pressure Switch\u003c\/strong\u003e — manufacturer part number \u003cstrong\u003e2374-522\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat this part does\u003c\/h2\u003e\u003cp\u003eThe pressure switch proves the inducer is actually moving exhaust before the board will open the gas valve. It senses vacuum through a small hose. Blocked hoses, a blocked flue, or water in the condensate trap all make it fail to close.\u003c\/p\u003e\n\u003ch2\u003eReplace this part if\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eInducer runs but the igniter never glows\u003c\/li\u003e\n\u003cli\u003eBoard flashes a pressure-switch or open-circuit code\u003c\/li\u003e\n\u003cli\u003eFurnace tries repeatedly then locks out\u003c\/li\u003e\n\u003cli\u003eSwitch hose is cracked, kinked, or full of water\u003c\/li\u003e\n\u003cli\u003eSwitch does not click when the inducer starts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e2374-522\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold By\u003c\/th\u003e\n\u003ctd\u003eFurnace Direct (Hamlin Mechanical LLC, MN Lic. #128688)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstall difficulty\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEasy\u003c\/strong\u003e — about 25 minutes. Tools: Nut driver, screwdriver. Power off at the breaker: yes. Gas shutoff required: no.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety warning:\u003c\/strong\u003e Check the hose and the condensate trap before replacing the switch. A blocked drain is a more common cause than a failed switch, and it costs nothing to clear.\u003c\/p\u003e\n\u003cp\u003eTypical service life is 8-15 years. Most HVAC companies charge $200-400 to replace this part, including the service call.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I know if my furnace pressure switch is bad?\u003c\/h3\u003e\u003cp\u003eReplace it if you see any of these: inducer runs but the igniter never glows; board flashes a pressure-switch or open-circuit code; furnace tries repeatedly then locks out.\u003c\/p\u003e\n\u003ch3\u003eCan I replace a furnace pressure switch myself?\u003c\/h3\u003e\u003cp\u003eYes. This is a easy repair that takes about 25 minutes with nut driver, screwdriver. Always shut the power off at the breaker first. Check the hose and the condensate trap before replacing the switch. A blocked drain is a more common cause than a failed switch, and it costs nothing to clear.\u003c\/p\u003e\n\u003ch3\u003eHow long does a furnace pressure switch last?\u003c\/h3\u003e\u003cp\u003eTypically 8-15 years in normal residential use. Heavy cycling, poor airflow, and dirty filters all shorten that.\u003c\/p\u003e\n\u003ch3\u003eHow much does a contractor charge to replace a furnace pressure switch?\u003c\/h3\u003e\u003cp\u003eMost HVAC companies charge $200-400 for this repair, including the service call. The part itself is $82.95.\u003c\/p\u003e\n\u003ch3\u003eHow fast does this ship?\u003c\/h3\u003e\u003cp\u003eOrders placed by 2 PM CT typically ship the same business day, with delivery in 1-5 business days.\u003c\/p\u003e\n\u003ch3\u003eWhat if it does not fit?\u003c\/h3\u003e\u003cp\u003eReturn it within 90 days. If you are unsure before ordering, call (888) 762-1334 — we are licensed HVAC contractors and can confirm the right part for your model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold by licensed HVAC contractors.\u003c\/strong\u003e Furnace Direct is Hamlin Mechanical LLC, Minnesota licence #128688. If this part does not fix the problem, call (888) 762-1334 and we will help you work out what will.\u003c\/p\u003e","brand":"Furnace Direct","offers":[{"title":"Default Title","offer_id":58271394595119,"sku":"2374-522","price":82.95,"currency_code":"USD","in_stock":true}]},{"product_id":"furnace-pressure-switch-632491r","title":"Furnace Pressure Switch | 632491R","description":"\u003cp\u003e\u003cstrong\u003eFurnace Pressure Switch\u003c\/strong\u003e — manufacturer part number \u003cstrong\u003e632491R\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat this part does\u003c\/h2\u003e\u003cp\u003eThe pressure switch proves the inducer is actually moving exhaust before the board will open the gas valve. It senses vacuum through a small hose. Blocked hoses, a blocked flue, or water in the condensate trap all make it fail to close.\u003c\/p\u003e\n\u003ch2\u003eReplace this part if\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eInducer runs but the igniter never glows\u003c\/li\u003e\n\u003cli\u003eBoard flashes a pressure-switch or open-circuit code\u003c\/li\u003e\n\u003cli\u003eFurnace tries repeatedly then locks out\u003c\/li\u003e\n\u003cli\u003eSwitch hose is cracked, kinked, or full of water\u003c\/li\u003e\n\u003cli\u003eSwitch does not click when the inducer starts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e632491R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold By\u003c\/th\u003e\n\u003ctd\u003eFurnace Direct (Hamlin Mechanical LLC, MN Lic. #128688)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstall difficulty\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEasy\u003c\/strong\u003e — about 25 minutes. Tools: Nut driver, screwdriver. Power off at the breaker: yes. Gas shutoff required: no.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety warning:\u003c\/strong\u003e Check the hose and the condensate trap before replacing the switch. A blocked drain is a more common cause than a failed switch, and it costs nothing to clear.\u003c\/p\u003e\n\u003cp\u003eTypical service life is 8-15 years. Most HVAC companies charge $200-400 to replace this part, including the service call.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I know if my furnace pressure switch is bad?\u003c\/h3\u003e\u003cp\u003eReplace it if you see any of these: inducer runs but the igniter never glows; board flashes a pressure-switch or open-circuit code; furnace tries repeatedly then locks out.\u003c\/p\u003e\n\u003ch3\u003eCan I replace a furnace pressure switch myself?\u003c\/h3\u003e\u003cp\u003eYes. This is a easy repair that takes about 25 minutes with nut driver, screwdriver. Always shut the power off at the breaker first. Check the hose and the condensate trap before replacing the switch. A blocked drain is a more common cause than a failed switch, and it costs nothing to clear.\u003c\/p\u003e\n\u003ch3\u003eHow long does a furnace pressure switch last?\u003c\/h3\u003e\u003cp\u003eTypically 8-15 years in normal residential use. Heavy cycling, poor airflow, and dirty filters all shorten that.\u003c\/p\u003e\n\u003ch3\u003eHow much does a contractor charge to replace a furnace pressure switch?\u003c\/h3\u003e\u003cp\u003eMost HVAC companies charge $200-400 for this repair, including the service call. The part itself is $78.95.\u003c\/p\u003e\n\u003ch3\u003eHow fast does this ship?\u003c\/h3\u003e\u003cp\u003eOrders placed by 2 PM CT typically ship the same business day, with delivery in 1-5 business days.\u003c\/p\u003e\n\u003ch3\u003eWhat if it does not fit?\u003c\/h3\u003e\u003cp\u003eReturn it within 90 days. If you are unsure before ordering, call (888) 762-1334 — we are licensed HVAC contractors and can confirm the right part for your model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold by licensed HVAC contractors.\u003c\/strong\u003e Furnace Direct is Hamlin Mechanical LLC, Minnesota licence #128688. If this part does not fix the problem, call (888) 762-1334 and we will help you work out what will.\u003c\/p\u003e","brand":"Furnace Direct","offers":[{"title":"Default Title","offer_id":58271394627887,"sku":"632491R","price":78.95,"currency_code":"USD","in_stock":true}]},{"product_id":"furnace-pressure-switch-m43331","title":"Furnace Pressure Switch | M43331","description":"\u003cp\u003e\u003cstrong\u003eFurnace Pressure Switch\u003c\/strong\u003e — manufacturer part number \u003cstrong\u003eM43331\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat this part does\u003c\/h2\u003e\u003cp\u003eThe pressure switch proves the inducer is actually moving exhaust before the board will open the gas valve. It senses vacuum through a small hose. Blocked hoses, a blocked flue, or water in the condensate trap all make it fail to close.\u003c\/p\u003e\n\u003ch2\u003eReplace this part if\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eInducer runs but the igniter never glows\u003c\/li\u003e\n\u003cli\u003eBoard flashes a pressure-switch or open-circuit code\u003c\/li\u003e\n\u003cli\u003eFurnace tries repeatedly then locks out\u003c\/li\u003e\n\u003cli\u003eSwitch hose is cracked, kinked, or full of water\u003c\/li\u003e\n\u003cli\u003eSwitch does not click when the inducer starts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eM43331\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold By\u003c\/th\u003e\n\u003ctd\u003eFurnace Direct (Hamlin Mechanical LLC, MN Lic. #128688)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstall difficulty\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEasy\u003c\/strong\u003e — about 25 minutes. Tools: Nut driver, screwdriver. Power off at the breaker: yes. Gas shutoff required: no.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety warning:\u003c\/strong\u003e Check the hose and the condensate trap before replacing the switch. A blocked drain is a more common cause than a failed switch, and it costs nothing to clear.\u003c\/p\u003e\n\u003cp\u003eTypical service life is 8-15 years. Most HVAC companies charge $200-400 to replace this part, including the service call.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I know if my furnace pressure switch is bad?\u003c\/h3\u003e\u003cp\u003eReplace it if you see any of these: inducer runs but the igniter never glows; board flashes a pressure-switch or open-circuit code; furnace tries repeatedly then locks out.\u003c\/p\u003e\n\u003ch3\u003eCan I replace a furnace pressure switch myself?\u003c\/h3\u003e\u003cp\u003eYes. This is a easy repair that takes about 25 minutes with nut driver, screwdriver. Always shut the power off at the breaker first. Check the hose and the condensate trap before replacing the switch. A blocked drain is a more common cause than a failed switch, and it costs nothing to clear.\u003c\/p\u003e\n\u003ch3\u003eHow long does a furnace pressure switch last?\u003c\/h3\u003e\u003cp\u003eTypically 8-15 years in normal residential use. Heavy cycling, poor airflow, and dirty filters all shorten that.\u003c\/p\u003e\n\u003ch3\u003eHow much does a contractor charge to replace a furnace pressure switch?\u003c\/h3\u003e\u003cp\u003eMost HVAC companies charge $200-400 for this repair, including the service call. The part itself is $55.95.\u003c\/p\u003e\n\u003ch3\u003eHow fast does this ship?\u003c\/h3\u003e\u003cp\u003eOrders placed by 2 PM CT typically ship the same business day, with delivery in 1-5 business days.\u003c\/p\u003e\n\u003ch3\u003eWhat if it does not fit?\u003c\/h3\u003e\u003cp\u003eReturn it within 90 days. If you are unsure before ordering, call (888) 762-1334 — we are licensed HVAC contractors and can confirm the right part for your model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold by licensed HVAC contractors.\u003c\/strong\u003e Furnace Direct is Hamlin Mechanical LLC, Minnesota licence #128688. If this part does not fix the problem, call (888) 762-1334 and we will help you work out what will.\u003c\/p\u003e","brand":"Furnace Direct","offers":[{"title":"Default Title","offer_id":58271394660655,"sku":"M43331","price":55.95,"currency_code":"USD","in_stock":true}]},{"product_id":"furnace-pressure-switch-m43355","title":"Furnace Pressure Switch | M43355","description":"\u003cp\u003e\u003cstrong\u003eFurnace Pressure Switch\u003c\/strong\u003e — manufacturer part number \u003cstrong\u003eM43355\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat this part does\u003c\/h2\u003e\u003cp\u003eThe pressure switch proves the inducer is actually moving exhaust before the board will open the gas valve. It senses vacuum through a small hose. Blocked hoses, a blocked flue, or water in the condensate trap all make it fail to close.\u003c\/p\u003e\n\u003ch2\u003eReplace this part if\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eInducer runs but the igniter never glows\u003c\/li\u003e\n\u003cli\u003eBoard flashes a pressure-switch or open-circuit code\u003c\/li\u003e\n\u003cli\u003eFurnace tries repeatedly then locks out\u003c\/li\u003e\n\u003cli\u003eSwitch hose is cracked, kinked, or full of water\u003c\/li\u003e\n\u003cli\u003eSwitch does not click when the inducer starts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eM43355\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold By\u003c\/th\u003e\n\u003ctd\u003eFurnace Direct (Hamlin Mechanical LLC, MN Lic. #128688)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstall difficulty\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEasy\u003c\/strong\u003e — about 25 minutes. Tools: Nut driver, screwdriver. Power off at the breaker: yes. Gas shutoff required: no.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety warning:\u003c\/strong\u003e Check the hose and the condensate trap before replacing the switch. A blocked drain is a more common cause than a failed switch, and it costs nothing to clear.\u003c\/p\u003e\n\u003cp\u003eTypical service life is 8-15 years. Most HVAC companies charge $200-400 to replace this part, including the service call.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I know if my furnace pressure switch is bad?\u003c\/h3\u003e\u003cp\u003eReplace it if you see any of these: inducer runs but the igniter never glows; board flashes a pressure-switch or open-circuit code; furnace tries repeatedly then locks out.\u003c\/p\u003e\n\u003ch3\u003eCan I replace a furnace pressure switch myself?\u003c\/h3\u003e\u003cp\u003eYes. This is a easy repair that takes about 25 minutes with nut driver, screwdriver. Always shut the power off at the breaker first. Check the hose and the condensate trap before replacing the switch. A blocked drain is a more common cause than a failed switch, and it costs nothing to clear.\u003c\/p\u003e\n\u003ch3\u003eHow long does a furnace pressure switch last?\u003c\/h3\u003e\u003cp\u003eTypically 8-15 years in normal residential use. Heavy cycling, poor airflow, and dirty filters all shorten that.\u003c\/p\u003e\n\u003ch3\u003eHow much does a contractor charge to replace a furnace pressure switch?\u003c\/h3\u003e\u003cp\u003eMost HVAC companies charge $200-400 for this repair, including the service call. The part itself is $55.95.\u003c\/p\u003e\n\u003ch3\u003eHow fast does this ship?\u003c\/h3\u003e\u003cp\u003eOrders placed by 2 PM CT typically ship the same business day, with delivery in 1-5 business days.\u003c\/p\u003e\n\u003ch3\u003eWhat if it does not fit?\u003c\/h3\u003e\u003cp\u003eReturn it within 90 days. If you are unsure before ordering, call (888) 762-1334 — we are licensed HVAC contractors and can confirm the right part for your model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold by licensed HVAC contractors.\u003c\/strong\u003e Furnace Direct is Hamlin Mechanical LLC, Minnesota licence #128688. If this part does not fix the problem, call (888) 762-1334 and we will help you work out what will.\u003c\/p\u003e","brand":"Furnace Direct","offers":[{"title":"Default Title","offer_id":58271394693423,"sku":"M43355","price":55.95,"currency_code":"USD","in_stock":true}]},{"product_id":"furnace-pressure-switch-632427r","title":"Furnace Pressure Switch | 632427R","description":"\u003cp\u003e\u003cstrong\u003eFurnace Pressure Switch\u003c\/strong\u003e — manufacturer part number \u003cstrong\u003e632427R\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat this part does\u003c\/h2\u003e\u003cp\u003eThe pressure switch proves the inducer is actually moving exhaust before the board will open the gas valve. It senses vacuum through a small hose. Blocked hoses, a blocked flue, or water in the condensate trap all make it fail to close.\u003c\/p\u003e\n\u003ch2\u003eReplace this part if\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eInducer runs but the igniter never glows\u003c\/li\u003e\n\u003cli\u003eBoard flashes a pressure-switch or open-circuit code\u003c\/li\u003e\n\u003cli\u003eFurnace tries repeatedly then locks out\u003c\/li\u003e\n\u003cli\u003eSwitch hose is cracked, kinked, or full of water\u003c\/li\u003e\n\u003cli\u003eSwitch does not click when the inducer starts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e632427R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold By\u003c\/th\u003e\n\u003ctd\u003eFurnace Direct (Hamlin Mechanical LLC, MN Lic. #128688)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstall difficulty\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEasy\u003c\/strong\u003e — about 25 minutes. Tools: Nut driver, screwdriver. Power off at the breaker: yes. Gas shutoff required: no.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety warning:\u003c\/strong\u003e Check the hose and the condensate trap before replacing the switch. A blocked drain is a more common cause than a failed switch, and it costs nothing to clear.\u003c\/p\u003e\n\u003cp\u003eTypical service life is 8-15 years. Most HVAC companies charge $200-400 to replace this part, including the service call.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I know if my furnace pressure switch is bad?\u003c\/h3\u003e\u003cp\u003eReplace it if you see any of these: inducer runs but the igniter never glows; board flashes a pressure-switch or open-circuit code; furnace tries repeatedly then locks out.\u003c\/p\u003e\n\u003ch3\u003eCan I replace a furnace pressure switch myself?\u003c\/h3\u003e\u003cp\u003eYes. This is a easy repair that takes about 25 minutes with nut driver, screwdriver. Always shut the power off at the breaker first. Check the hose and the condensate trap before replacing the switch. A blocked drain is a more common cause than a failed switch, and it costs nothing to clear.\u003c\/p\u003e\n\u003ch3\u003eHow long does a furnace pressure switch last?\u003c\/h3\u003e\u003cp\u003eTypically 8-15 years in normal residential use. Heavy cycling, poor airflow, and dirty filters all shorten that.\u003c\/p\u003e\n\u003ch3\u003eHow much does a contractor charge to replace a furnace pressure switch?\u003c\/h3\u003e\u003cp\u003eMost HVAC companies charge $200-400 for this repair, including the service call. The part itself is $64.95.\u003c\/p\u003e\n\u003ch3\u003eHow fast does this ship?\u003c\/h3\u003e\u003cp\u003eOrders placed by 2 PM CT typically ship the same business day, with delivery in 1-5 business days.\u003c\/p\u003e\n\u003ch3\u003eWhat if it does not fit?\u003c\/h3\u003e\u003cp\u003eReturn it within 90 days. If you are unsure before ordering, call (888) 762-1334 — we are licensed HVAC contractors and can confirm the right part for your model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold by licensed HVAC contractors.\u003c\/strong\u003e Furnace Direct is Hamlin Mechanical LLC, Minnesota licence #128688. If this part does not fix the problem, call (888) 762-1334 and we will help you work out what will.\u003c\/p\u003e","brand":"Furnace Direct","offers":[{"title":"Default Title","offer_id":58271394726191,"sku":"632427R","price":64.95,"currency_code":"USD","in_stock":true}]},{"product_id":"furnace-pressure-switch-m43332","title":"Furnace Pressure Switch | M43332","description":"\u003cp\u003e\u003cstrong\u003eFurnace Pressure Switch\u003c\/strong\u003e — manufacturer part number \u003cstrong\u003eM43332\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat this part does\u003c\/h2\u003e\u003cp\u003eThe pressure switch proves the inducer is actually moving exhaust before the board will open the gas valve. It senses vacuum through a small hose. Blocked hoses, a blocked flue, or water in the condensate trap all make it fail to close.\u003c\/p\u003e\n\u003ch2\u003eReplace this part if\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eInducer runs but the igniter never glows\u003c\/li\u003e\n\u003cli\u003eBoard flashes a pressure-switch or open-circuit code\u003c\/li\u003e\n\u003cli\u003eFurnace tries repeatedly then locks out\u003c\/li\u003e\n\u003cli\u003eSwitch hose is cracked, kinked, or full of water\u003c\/li\u003e\n\u003cli\u003eSwitch does not click when the inducer starts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eM43332\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold By\u003c\/th\u003e\n\u003ctd\u003eFurnace Direct (Hamlin Mechanical LLC, MN Lic. #128688)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstall difficulty\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEasy\u003c\/strong\u003e — about 25 minutes. Tools: Nut driver, screwdriver. Power off at the breaker: yes. Gas shutoff required: no.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety warning:\u003c\/strong\u003e Check the hose and the condensate trap before replacing the switch. A blocked drain is a more common cause than a failed switch, and it costs nothing to clear.\u003c\/p\u003e\n\u003cp\u003eTypical service life is 8-15 years. Most HVAC companies charge $200-400 to replace this part, including the service call.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I know if my furnace pressure switch is bad?\u003c\/h3\u003e\u003cp\u003eReplace it if you see any of these: inducer runs but the igniter never glows; board flashes a pressure-switch or open-circuit code; furnace tries repeatedly then locks out.\u003c\/p\u003e\n\u003ch3\u003eCan I replace a furnace pressure switch myself?\u003c\/h3\u003e\u003cp\u003eYes. This is a easy repair that takes about 25 minutes with nut driver, screwdriver. Always shut the power off at the breaker first. Check the hose and the condensate trap before replacing the switch. A blocked drain is a more common cause than a failed switch, and it costs nothing to clear.\u003c\/p\u003e\n\u003ch3\u003eHow long does a furnace pressure switch last?\u003c\/h3\u003e\u003cp\u003eTypically 8-15 years in normal residential use. Heavy cycling, poor airflow, and dirty filters all shorten that.\u003c\/p\u003e\n\u003ch3\u003eHow much does a contractor charge to replace a furnace pressure switch?\u003c\/h3\u003e\u003cp\u003eMost HVAC companies charge $200-400 for this repair, including the service call. The part itself is $56.95.\u003c\/p\u003e\n\u003ch3\u003eHow fast does this ship?\u003c\/h3\u003e\u003cp\u003eOrders placed by 2 PM CT typically ship the same business day, with delivery in 1-5 business days.\u003c\/p\u003e\n\u003ch3\u003eWhat if it does not fit?\u003c\/h3\u003e\u003cp\u003eReturn it within 90 days. If you are unsure before ordering, call (888) 762-1334 — we are licensed HVAC contractors and can confirm the right part for your model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold by licensed HVAC contractors.\u003c\/strong\u003e Furnace Direct is Hamlin Mechanical LLC, Minnesota licence #128688. If this part does not fix the problem, call (888) 762-1334 and we will help you work out what will.\u003c\/p\u003e","brand":"Furnace Direct","offers":[{"title":"Default Title","offer_id":58271394758959,"sku":"M43332","price":56.95,"currency_code":"USD","in_stock":true}]}],"url":"https:\/\/furnace.direct\/collections\/pressure-switches\/3-ton.oembed","provider":"Furnace Direct","version":"1.0","type":"link"}