{"title":"Furnace Igniters","description":"\u003cp\u003eHot surface igniters for gas furnaces. The igniter is the most common no-heat failure: it glows red-hot to light the burners, and when it cracks the furnace runs but never fires. All igniters below are in stock and ship the same business day when ordered by 2 PM CT.\u003c\/p\u003e","products":[{"product_id":"hot-surface-igniter-21d64-2","title":"Hot Surface Igniter — 120V | 21D64-2","description":"\u003cp\u003e\u003cstrong\u003eHot Surface Igniter — 120V\u003c\/strong\u003e — manufacturer part number \u003cstrong\u003e21D64-2\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat this part does\u003c\/h2\u003e\u003cp\u003eThe hot surface igniter glows red-hot to light the gas burners when your furnace calls for heat. When it cracks or burns out, the furnace runs its inducer and blower but never lights, so you get air movement and no heat.\u003c\/p\u003e\n\u003ch2\u003eReplace this part if\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFurnace runs but never ignites\u003c\/li\u003e\n\u003cli\u003eYou hear the inducer start, but no flame follows\u003c\/li\u003e\n\u003cli\u003eIgniter glows dim orange instead of bright white-orange\u003c\/li\u003e\n\u003cli\u003eIgniter is visibly cracked, chipped, or blistered white\u003c\/li\u003e\n\u003cli\u003eControl board flashes an ignition-failure or lockout code\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e120V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e21D64-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold By\u003c\/th\u003e\n\u003ctd\u003eFurnace Direct (Hamlin Mechanical LLC, MN Lic. #128688)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstall difficulty\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEasy\u003c\/strong\u003e — about 20 minutes. Tools: 1\/4\" nut driver, screwdriver. Power off at the breaker: yes. Gas shutoff required: no.\u003c\/p\u003e\n\u003cp\u003eTypical service life is 3-7 years. Most HVAC companies charge $250-350 to replace this part, including the service call.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I know if my hot surface igniter is bad?\u003c\/h3\u003e\u003cp\u003eReplace it if you see any of these: furnace runs but never ignites; you hear the inducer start, but no flame follows; igniter glows dim orange instead of bright white-orange.\u003c\/p\u003e\n\u003ch3\u003eCan I replace a hot surface igniter myself?\u003c\/h3\u003e\u003cp\u003eYes. This is a easy repair that takes about 20 minutes with 1\/4\" nut driver, screwdriver. Always shut the power off at the breaker first.\u003c\/p\u003e\n\u003ch3\u003eHow long does a hot surface igniter last?\u003c\/h3\u003e\u003cp\u003eTypically 3-7 years in normal residential use. Heavy cycling, poor airflow, and dirty filters all shorten that.\u003c\/p\u003e\n\u003ch3\u003eHow much does a contractor charge to replace a hot surface igniter?\u003c\/h3\u003e\u003cp\u003eMost HVAC companies charge $250-350 for this repair, including the service call. The part itself is $91.95.\u003c\/p\u003e\n\u003ch3\u003eHow fast does this ship?\u003c\/h3\u003e\u003cp\u003eOrders placed by 2 PM CT typically ship the same business day, with delivery in 1-5 business days.\u003c\/p\u003e\n\u003ch3\u003eWhat if it does not fit?\u003c\/h3\u003e\u003cp\u003eReturn it within 90 days. If you are unsure before ordering, call (888) 762-1334 — we are licensed HVAC contractors and can confirm the right part for your model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold by licensed HVAC contractors.\u003c\/strong\u003e Furnace Direct is Hamlin Mechanical LLC, Minnesota licence #128688. If this part does not fix the problem, call (888) 762-1334 and we will help you work out what will.\u003c\/p\u003e","brand":"Furnace Direct","offers":[{"title":"Default Title","offer_id":58271378473263,"sku":"21D64-2","price":91.95,"currency_code":"USD","in_stock":true}]},{"product_id":"hot-surface-igniter-1046638s","title":"Hot Surface Igniter | 1046638S","description":"\u003cp\u003e\u003cstrong\u003eHot Surface Igniter\u003c\/strong\u003e — manufacturer part number \u003cstrong\u003e1046638S\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat this part does\u003c\/h2\u003e\u003cp\u003eThe hot surface igniter glows red-hot to light the gas burners when your furnace calls for heat. When it cracks or burns out, the furnace runs its inducer and blower but never lights, so you get air movement and no heat.\u003c\/p\u003e\n\u003ch2\u003eReplace this part if\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFurnace runs but never ignites\u003c\/li\u003e\n\u003cli\u003eYou hear the inducer start, but no flame follows\u003c\/li\u003e\n\u003cli\u003eIgniter glows dim orange instead of bright white-orange\u003c\/li\u003e\n\u003cli\u003eIgniter is visibly cracked, chipped, or blistered white\u003c\/li\u003e\n\u003cli\u003eControl board flashes an ignition-failure or lockout code\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e1046638S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold By\u003c\/th\u003e\n\u003ctd\u003eFurnace Direct (Hamlin Mechanical LLC, MN Lic. #128688)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstall difficulty\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEasy\u003c\/strong\u003e — about 20 minutes. Tools: 1\/4\" nut driver, screwdriver. Power off at the breaker: yes. Gas shutoff required: no.\u003c\/p\u003e\n\u003cp\u003eTypical service life is 3-7 years. Most HVAC companies charge $250-350 to replace this part, including the service call.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I know if my hot surface igniter is bad?\u003c\/h3\u003e\u003cp\u003eReplace it if you see any of these: furnace runs but never ignites; you hear the inducer start, but no flame follows; igniter glows dim orange instead of bright white-orange.\u003c\/p\u003e\n\u003ch3\u003eCan I replace a hot surface igniter myself?\u003c\/h3\u003e\u003cp\u003eYes. This is a easy repair that takes about 20 minutes with 1\/4\" nut driver, screwdriver. Always shut the power off at the breaker first.\u003c\/p\u003e\n\u003ch3\u003eHow long does a hot surface igniter last?\u003c\/h3\u003e\u003cp\u003eTypically 3-7 years in normal residential use. Heavy cycling, poor airflow, and dirty filters all shorten that.\u003c\/p\u003e\n\u003ch3\u003eHow much does a contractor charge to replace a hot surface igniter?\u003c\/h3\u003e\u003cp\u003eMost HVAC companies charge $250-350 for this repair, including the service call. The part itself is $100.95.\u003c\/p\u003e\n\u003ch3\u003eHow fast does this ship?\u003c\/h3\u003e\u003cp\u003eOrders placed by 2 PM CT typically ship the same business day, with delivery in 1-5 business days.\u003c\/p\u003e\n\u003ch3\u003eWhat if it does not fit?\u003c\/h3\u003e\u003cp\u003eReturn it within 90 days. If you are unsure before ordering, call (888) 762-1334 — we are licensed HVAC contractors and can confirm the right part for your model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold by licensed HVAC contractors.\u003c\/strong\u003e Furnace Direct is Hamlin Mechanical LLC, Minnesota licence #128688. If this part does not fix the problem, call (888) 762-1334 and we will help you work out what will.\u003c\/p\u003e","brand":"Furnace Direct","offers":[{"title":"Default Title","offer_id":58271378506031,"sku":"1046638S","price":100.95,"currency_code":"USD","in_stock":true}]},{"product_id":"hot-surface-igniter-m68040","title":"Hot Surface Igniter | M68040","description":"\u003cp\u003e\u003cstrong\u003eHot Surface Igniter\u003c\/strong\u003e — manufacturer part number \u003cstrong\u003eM68040\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat this part does\u003c\/h2\u003e\u003cp\u003eThe hot surface igniter glows red-hot to light the gas burners when your furnace calls for heat. When it cracks or burns out, the furnace runs its inducer and blower but never lights, so you get air movement and no heat.\u003c\/p\u003e\n\u003ch2\u003eReplace this part if\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFurnace runs but never ignites\u003c\/li\u003e\n\u003cli\u003eYou hear the inducer start, but no flame follows\u003c\/li\u003e\n\u003cli\u003eIgniter glows dim orange instead of bright white-orange\u003c\/li\u003e\n\u003cli\u003eIgniter is visibly cracked, chipped, or blistered white\u003c\/li\u003e\n\u003cli\u003eControl board flashes an ignition-failure or lockout code\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eM68040\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold By\u003c\/th\u003e\n\u003ctd\u003eFurnace Direct (Hamlin Mechanical LLC, MN Lic. #128688)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstall difficulty\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEasy\u003c\/strong\u003e — about 20 minutes. Tools: 1\/4\" nut driver, screwdriver. Power off at the breaker: yes. Gas shutoff required: no.\u003c\/p\u003e\n\u003cp\u003eTypical service life is 3-7 years. Most HVAC companies charge $250-350 to replace this part, including the service call.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I know if my hot surface igniter is bad?\u003c\/h3\u003e\u003cp\u003eReplace it if you see any of these: furnace runs but never ignites; you hear the inducer start, but no flame follows; igniter glows dim orange instead of bright white-orange.\u003c\/p\u003e\n\u003ch3\u003eCan I replace a hot surface igniter myself?\u003c\/h3\u003e\u003cp\u003eYes. This is a easy repair that takes about 20 minutes with 1\/4\" nut driver, screwdriver. Always shut the power off at the breaker first.\u003c\/p\u003e\n\u003ch3\u003eHow long does a hot surface igniter last?\u003c\/h3\u003e\u003cp\u003eTypically 3-7 years in normal residential use. Heavy cycling, poor airflow, and dirty filters all shorten that.\u003c\/p\u003e\n\u003ch3\u003eHow much does a contractor charge to replace a hot surface igniter?\u003c\/h3\u003e\u003cp\u003eMost HVAC companies charge $250-350 for this repair, including the service call. The part itself is $73.95.\u003c\/p\u003e\n\u003ch3\u003eHow fast does this ship?\u003c\/h3\u003e\u003cp\u003eOrders placed by 2 PM CT typically ship the same business day, with delivery in 1-5 business days.\u003c\/p\u003e\n\u003ch3\u003eWhat if it does not fit?\u003c\/h3\u003e\u003cp\u003eReturn it within 90 days. If you are unsure before ordering, call (888) 762-1334 — we are licensed HVAC contractors and can confirm the right part for your model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold by licensed HVAC contractors.\u003c\/strong\u003e Furnace Direct is Hamlin Mechanical LLC, Minnesota licence #128688. If this part does not fix the problem, call (888) 762-1334 and we will help you work out what will.\u003c\/p\u003e","brand":"Furnace Direct","offers":[{"title":"Default Title","offer_id":58271378538799,"sku":"M68040","price":73.95,"currency_code":"USD","in_stock":true}]},{"product_id":"hot-surface-igniter-41-408","title":"Hot Surface Igniter | 41-408","description":"\u003cp\u003e\u003cstrong\u003eHot Surface Igniter\u003c\/strong\u003e — manufacturer part number \u003cstrong\u003e41-408\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat this part does\u003c\/h2\u003e\u003cp\u003eThe hot surface igniter glows red-hot to light the gas burners when your furnace calls for heat. When it cracks or burns out, the furnace runs its inducer and blower but never lights, so you get air movement and no heat.\u003c\/p\u003e\n\u003ch2\u003eReplace this part if\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFurnace runs but never ignites\u003c\/li\u003e\n\u003cli\u003eYou hear the inducer start, but no flame follows\u003c\/li\u003e\n\u003cli\u003eIgniter glows dim orange instead of bright white-orange\u003c\/li\u003e\n\u003cli\u003eIgniter is visibly cracked, chipped, or blistered white\u003c\/li\u003e\n\u003cli\u003eControl board flashes an ignition-failure or lockout code\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e41-408\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold By\u003c\/th\u003e\n\u003ctd\u003eFurnace Direct (Hamlin Mechanical LLC, MN Lic. #128688)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstall difficulty\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEasy\u003c\/strong\u003e — about 20 minutes. Tools: 1\/4\" nut driver, screwdriver. Power off at the breaker: yes. Gas shutoff required: no.\u003c\/p\u003e\n\u003cp\u003eTypical service life is 3-7 years. Most HVAC companies charge $250-350 to replace this part, including the service call.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I know if my hot surface igniter is bad?\u003c\/h3\u003e\u003cp\u003eReplace it if you see any of these: furnace runs but never ignites; you hear the inducer start, but no flame follows; igniter glows dim orange instead of bright white-orange.\u003c\/p\u003e\n\u003ch3\u003eCan I replace a hot surface igniter myself?\u003c\/h3\u003e\u003cp\u003eYes. This is a easy repair that takes about 20 minutes with 1\/4\" nut driver, screwdriver. Always shut the power off at the breaker first.\u003c\/p\u003e\n\u003ch3\u003eHow long does a hot surface igniter last?\u003c\/h3\u003e\u003cp\u003eTypically 3-7 years in normal residential use. Heavy cycling, poor airflow, and dirty filters all shorten that.\u003c\/p\u003e\n\u003ch3\u003eHow much does a contractor charge to replace a hot surface igniter?\u003c\/h3\u003e\u003cp\u003eMost HVAC companies charge $250-350 for this repair, including the service call. The part itself is $48.95.\u003c\/p\u003e\n\u003ch3\u003eHow fast does this ship?\u003c\/h3\u003e\u003cp\u003eOrders placed by 2 PM CT typically ship the same business day, with delivery in 1-5 business days.\u003c\/p\u003e\n\u003ch3\u003eWhat if it does not fit?\u003c\/h3\u003e\u003cp\u003eReturn it within 90 days. If you are unsure before ordering, call (888) 762-1334 — we are licensed HVAC contractors and can confirm the right part for your model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold by licensed HVAC contractors.\u003c\/strong\u003e Furnace Direct is Hamlin Mechanical LLC, Minnesota licence #128688. If this part does not fix the problem, call (888) 762-1334 and we will help you work out what will.\u003c\/p\u003e","brand":"Furnace Direct","offers":[{"title":"Default Title","offer_id":58271378964783,"sku":"41-408","price":48.95,"currency_code":"USD","in_stock":true}]},{"product_id":"hot-surface-igniter-41-402","title":"Hot Surface Igniter | 41-402","description":"\u003cp\u003e\u003cstrong\u003eHot Surface Igniter\u003c\/strong\u003e — manufacturer part number \u003cstrong\u003e41-402\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat this part does\u003c\/h2\u003e\u003cp\u003eThe hot surface igniter glows red-hot to light the gas burners when your furnace calls for heat. When it cracks or burns out, the furnace runs its inducer and blower but never lights, so you get air movement and no heat.\u003c\/p\u003e\n\u003ch2\u003eReplace this part if\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFurnace runs but never ignites\u003c\/li\u003e\n\u003cli\u003eYou hear the inducer start, but no flame follows\u003c\/li\u003e\n\u003cli\u003eIgniter glows dim orange instead of bright white-orange\u003c\/li\u003e\n\u003cli\u003eIgniter is visibly cracked, chipped, or blistered white\u003c\/li\u003e\n\u003cli\u003eControl board flashes an ignition-failure or lockout code\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e41-402\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold By\u003c\/th\u003e\n\u003ctd\u003eFurnace Direct (Hamlin Mechanical LLC, MN Lic. #128688)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstall difficulty\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEasy\u003c\/strong\u003e — about 20 minutes. Tools: 1\/4\" nut driver, screwdriver. Power off at the breaker: yes. Gas shutoff required: no.\u003c\/p\u003e\n\u003cp\u003eTypical service life is 3-7 years. Most HVAC companies charge $250-350 to replace this part, including the service call.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I know if my hot surface igniter is bad?\u003c\/h3\u003e\u003cp\u003eReplace it if you see any of these: furnace runs but never ignites; you hear the inducer start, but no flame follows; igniter glows dim orange instead of bright white-orange.\u003c\/p\u003e\n\u003ch3\u003eCan I replace a hot surface igniter myself?\u003c\/h3\u003e\u003cp\u003eYes. This is a easy repair that takes about 20 minutes with 1\/4\" nut driver, screwdriver. Always shut the power off at the breaker first.\u003c\/p\u003e\n\u003ch3\u003eHow long does a hot surface igniter last?\u003c\/h3\u003e\u003cp\u003eTypically 3-7 years in normal residential use. Heavy cycling, poor airflow, and dirty filters all shorten that.\u003c\/p\u003e\n\u003ch3\u003eHow much does a contractor charge to replace a hot surface igniter?\u003c\/h3\u003e\u003cp\u003eMost HVAC companies charge $250-350 for this repair, including the service call. The part itself is $49.95.\u003c\/p\u003e\n\u003ch3\u003eHow fast does this ship?\u003c\/h3\u003e\u003cp\u003eOrders placed by 2 PM CT typically ship the same business day, with delivery in 1-5 business days.\u003c\/p\u003e\n\u003ch3\u003eWhat if it does not fit?\u003c\/h3\u003e\u003cp\u003eReturn it within 90 days. If you are unsure before ordering, call (888) 762-1334 — we are licensed HVAC contractors and can confirm the right part for your model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold by licensed HVAC contractors.\u003c\/strong\u003e Furnace Direct is Hamlin Mechanical LLC, Minnesota licence #128688. If this part does not fix the problem, call (888) 762-1334 and we will help you work out what will.\u003c\/p\u003e","brand":"Furnace Direct","offers":[{"title":"Default Title","offer_id":58271379194159,"sku":"41-402","price":49.95,"currency_code":"USD","in_stock":true}]},{"product_id":"hot-surface-igniter-41-409","title":"Hot Surface Igniter | 41-409","description":"\u003cp\u003e\u003cstrong\u003eHot Surface Igniter\u003c\/strong\u003e — manufacturer part number \u003cstrong\u003e41-409\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat this part does\u003c\/h2\u003e\u003cp\u003eThe hot surface igniter glows red-hot to light the gas burners when your furnace calls for heat. When it cracks or burns out, the furnace runs its inducer and blower but never lights, so you get air movement and no heat.\u003c\/p\u003e\n\u003ch2\u003eReplace this part if\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFurnace runs but never ignites\u003c\/li\u003e\n\u003cli\u003eYou hear the inducer start, but no flame follows\u003c\/li\u003e\n\u003cli\u003eIgniter glows dim orange instead of bright white-orange\u003c\/li\u003e\n\u003cli\u003eIgniter is visibly cracked, chipped, or blistered white\u003c\/li\u003e\n\u003cli\u003eControl board flashes an ignition-failure or lockout code\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e41-409\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold By\u003c\/th\u003e\n\u003ctd\u003eFurnace Direct (Hamlin Mechanical LLC, MN Lic. #128688)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstall difficulty\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEasy\u003c\/strong\u003e — about 20 minutes. Tools: 1\/4\" nut driver, screwdriver. Power off at the breaker: yes. Gas shutoff required: no.\u003c\/p\u003e\n\u003cp\u003eTypical service life is 3-7 years. Most HVAC companies charge $250-350 to replace this part, including the service call.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I know if my hot surface igniter is bad?\u003c\/h3\u003e\u003cp\u003eReplace it if you see any of these: furnace runs but never ignites; you hear the inducer start, but no flame follows; igniter glows dim orange instead of bright white-orange.\u003c\/p\u003e\n\u003ch3\u003eCan I replace a hot surface igniter myself?\u003c\/h3\u003e\u003cp\u003eYes. This is a easy repair that takes about 20 minutes with 1\/4\" nut driver, screwdriver. Always shut the power off at the breaker first.\u003c\/p\u003e\n\u003ch3\u003eHow long does a hot surface igniter last?\u003c\/h3\u003e\u003cp\u003eTypically 3-7 years in normal residential use. Heavy cycling, poor airflow, and dirty filters all shorten that.\u003c\/p\u003e\n\u003ch3\u003eHow much does a contractor charge to replace a hot surface igniter?\u003c\/h3\u003e\u003cp\u003eMost HVAC companies charge $250-350 for this repair, including the service call. The part itself is $48.95.\u003c\/p\u003e\n\u003ch3\u003eHow fast does this ship?\u003c\/h3\u003e\u003cp\u003eOrders placed by 2 PM CT typically ship the same business day, with delivery in 1-5 business days.\u003c\/p\u003e\n\u003ch3\u003eWhat if it does not fit?\u003c\/h3\u003e\u003cp\u003eReturn it within 90 days. If you are unsure before ordering, call (888) 762-1334 — we are licensed HVAC contractors and can confirm the right part for your model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold by licensed HVAC contractors.\u003c\/strong\u003e Furnace Direct is Hamlin Mechanical LLC, Minnesota licence #128688. If this part does not fix the problem, call (888) 762-1334 and we will help you work out what will.\u003c\/p\u003e","brand":"Furnace Direct","offers":[{"title":"Default Title","offer_id":58271379226927,"sku":"41-409","price":48.95,"currency_code":"USD","in_stock":true}]},{"product_id":"hot-surface-igniter-41-412","title":"Hot Surface Igniter | 41-412","description":"\u003cp\u003e\u003cstrong\u003eHot Surface Igniter\u003c\/strong\u003e — manufacturer part number \u003cstrong\u003e41-412\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat this part does\u003c\/h2\u003e\u003cp\u003eThe hot surface igniter glows red-hot to light the gas burners when your furnace calls for heat. When it cracks or burns out, the furnace runs its inducer and blower but never lights, so you get air movement and no heat.\u003c\/p\u003e\n\u003ch2\u003eReplace this part if\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFurnace runs but never ignites\u003c\/li\u003e\n\u003cli\u003eYou hear the inducer start, but no flame follows\u003c\/li\u003e\n\u003cli\u003eIgniter glows dim orange instead of bright white-orange\u003c\/li\u003e\n\u003cli\u003eIgniter is visibly cracked, chipped, or blistered white\u003c\/li\u003e\n\u003cli\u003eControl board flashes an ignition-failure or lockout code\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e41-412\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold By\u003c\/th\u003e\n\u003ctd\u003eFurnace Direct (Hamlin Mechanical LLC, MN Lic. #128688)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstall difficulty\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEasy\u003c\/strong\u003e — about 20 minutes. Tools: 1\/4\" nut driver, screwdriver. Power off at the breaker: yes. Gas shutoff required: no.\u003c\/p\u003e\n\u003cp\u003eTypical service life is 3-7 years. Most HVAC companies charge $250-350 to replace this part, including the service call.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I know if my hot surface igniter is bad?\u003c\/h3\u003e\u003cp\u003eReplace it if you see any of these: furnace runs but never ignites; you hear the inducer start, but no flame follows; igniter glows dim orange instead of bright white-orange.\u003c\/p\u003e\n\u003ch3\u003eCan I replace a hot surface igniter myself?\u003c\/h3\u003e\u003cp\u003eYes. This is a easy repair that takes about 20 minutes with 1\/4\" nut driver, screwdriver. Always shut the power off at the breaker first.\u003c\/p\u003e\n\u003ch3\u003eHow long does a hot surface igniter last?\u003c\/h3\u003e\u003cp\u003eTypically 3-7 years in normal residential use. Heavy cycling, poor airflow, and dirty filters all shorten that.\u003c\/p\u003e\n\u003ch3\u003eHow much does a contractor charge to replace a hot surface igniter?\u003c\/h3\u003e\u003cp\u003eMost HVAC companies charge $250-350 for this repair, including the service call. The part itself is $48.95.\u003c\/p\u003e\n\u003ch3\u003eHow fast does this ship?\u003c\/h3\u003e\u003cp\u003eOrders placed by 2 PM CT typically ship the same business day, with delivery in 1-5 business days.\u003c\/p\u003e\n\u003ch3\u003eWhat if it does not fit?\u003c\/h3\u003e\u003cp\u003eReturn it within 90 days. If you are unsure before ordering, call (888) 762-1334 — we are licensed HVAC contractors and can confirm the right part for your model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold by licensed HVAC contractors.\u003c\/strong\u003e Furnace Direct is Hamlin Mechanical LLC, Minnesota licence #128688. If this part does not fix the problem, call (888) 762-1334 and we will help you work out what will.\u003c\/p\u003e","brand":"Furnace Direct","offers":[{"title":"Default Title","offer_id":58271379259695,"sku":"41-412","price":48.95,"currency_code":"USD","in_stock":true}]},{"product_id":"hot-surface-igniter-fc035","title":"Hot Surface Igniter | FC035","description":"\u003cp\u003e\u003cstrong\u003eHot Surface Igniter\u003c\/strong\u003e — manufacturer part number \u003cstrong\u003eFC035\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat this part does\u003c\/h2\u003e\u003cp\u003eThe hot surface igniter glows red-hot to light the gas burners when your furnace calls for heat. When it cracks or burns out, the furnace runs its inducer and blower but never lights, so you get air movement and no heat.\u003c\/p\u003e\n\u003ch2\u003eReplace this part if\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFurnace runs but never ignites\u003c\/li\u003e\n\u003cli\u003eYou hear the inducer start, but no flame follows\u003c\/li\u003e\n\u003cli\u003eIgniter glows dim orange instead of bright white-orange\u003c\/li\u003e\n\u003cli\u003eIgniter is visibly cracked, chipped, or blistered white\u003c\/li\u003e\n\u003cli\u003eControl board flashes an ignition-failure or lockout code\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eFC035\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold By\u003c\/th\u003e\n\u003ctd\u003eFurnace Direct (Hamlin Mechanical LLC, MN Lic. #128688)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstall difficulty\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEasy\u003c\/strong\u003e — about 20 minutes. Tools: 1\/4\" nut driver, screwdriver. Power off at the breaker: yes. Gas shutoff required: no.\u003c\/p\u003e\n\u003cp\u003eTypical service life is 3-7 years. Most HVAC companies charge $250-350 to replace this part, including the service call.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I know if my hot surface igniter is bad?\u003c\/h3\u003e\u003cp\u003eReplace it if you see any of these: furnace runs but never ignites; you hear the inducer start, but no flame follows; igniter glows dim orange instead of bright white-orange.\u003c\/p\u003e\n\u003ch3\u003eCan I replace a hot surface igniter myself?\u003c\/h3\u003e\u003cp\u003eYes. This is a easy repair that takes about 20 minutes with 1\/4\" nut driver, screwdriver. Always shut the power off at the breaker first.\u003c\/p\u003e\n\u003ch3\u003eHow long does a hot surface igniter last?\u003c\/h3\u003e\u003cp\u003eTypically 3-7 years in normal residential use. Heavy cycling, poor airflow, and dirty filters all shorten that.\u003c\/p\u003e\n\u003ch3\u003eHow much does a contractor charge to replace a hot surface igniter?\u003c\/h3\u003e\u003cp\u003eMost HVAC companies charge $250-350 for this repair, including the service call. The part itself is $53.95.\u003c\/p\u003e\n\u003ch3\u003eHow fast does this ship?\u003c\/h3\u003e\u003cp\u003eOrders placed by 2 PM CT typically ship the same business day, with delivery in 1-5 business days.\u003c\/p\u003e\n\u003ch3\u003eWhat if it does not fit?\u003c\/h3\u003e\u003cp\u003eReturn it within 90 days. If you are unsure before ordering, call (888) 762-1334 — we are licensed HVAC contractors and can confirm the right part for your model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold by licensed HVAC contractors.\u003c\/strong\u003e Furnace Direct is Hamlin Mechanical LLC, Minnesota licence #128688. If this part does not fix the problem, call (888) 762-1334 and we will help you work out what will.\u003c\/p\u003e","brand":"Furnace Direct","offers":[{"title":"Default Title","offer_id":58271379292463,"sku":"FC035","price":53.95,"currency_code":"USD","in_stock":true}]},{"product_id":"hot-surface-igniter-41-401","title":"Hot Surface Igniter | 41-401","description":"\u003cp\u003e\u003cstrong\u003eHot Surface Igniter\u003c\/strong\u003e — manufacturer part number \u003cstrong\u003e41-401\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat this part does\u003c\/h2\u003e\u003cp\u003eThe hot surface igniter glows red-hot to light the gas burners when your furnace calls for heat. When it cracks or burns out, the furnace runs its inducer and blower but never lights, so you get air movement and no heat.\u003c\/p\u003e\n\u003ch2\u003eReplace this part if\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFurnace runs but never ignites\u003c\/li\u003e\n\u003cli\u003eYou hear the inducer start, but no flame follows\u003c\/li\u003e\n\u003cli\u003eIgniter glows dim orange instead of bright white-orange\u003c\/li\u003e\n\u003cli\u003eIgniter is visibly cracked, chipped, or blistered white\u003c\/li\u003e\n\u003cli\u003eControl board flashes an ignition-failure or lockout code\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e41-401\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold By\u003c\/th\u003e\n\u003ctd\u003eFurnace Direct (Hamlin Mechanical LLC, MN Lic. #128688)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstall difficulty\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEasy\u003c\/strong\u003e — about 20 minutes. Tools: 1\/4\" nut driver, screwdriver. Power off at the breaker: yes. Gas shutoff required: no.\u003c\/p\u003e\n\u003cp\u003eTypical service life is 3-7 years. Most HVAC companies charge $250-350 to replace this part, including the service call.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I know if my hot surface igniter is bad?\u003c\/h3\u003e\u003cp\u003eReplace it if you see any of these: furnace runs but never ignites; you hear the inducer start, but no flame follows; igniter glows dim orange instead of bright white-orange.\u003c\/p\u003e\n\u003ch3\u003eCan I replace a hot surface igniter myself?\u003c\/h3\u003e\u003cp\u003eYes. This is a easy repair that takes about 20 minutes with 1\/4\" nut driver, screwdriver. Always shut the power off at the breaker first.\u003c\/p\u003e\n\u003ch3\u003eHow long does a hot surface igniter last?\u003c\/h3\u003e\u003cp\u003eTypically 3-7 years in normal residential use. Heavy cycling, poor airflow, and dirty filters all shorten that.\u003c\/p\u003e\n\u003ch3\u003eHow much does a contractor charge to replace a hot surface igniter?\u003c\/h3\u003e\u003cp\u003eMost HVAC companies charge $250-350 for this repair, including the service call. The part itself is $56.95.\u003c\/p\u003e\n\u003ch3\u003eHow fast does this ship?\u003c\/h3\u003e\u003cp\u003eOrders placed by 2 PM CT typically ship the same business day, with delivery in 1-5 business days.\u003c\/p\u003e\n\u003ch3\u003eWhat if it does not fit?\u003c\/h3\u003e\u003cp\u003eReturn it within 90 days. If you are unsure before ordering, call (888) 762-1334 — we are licensed HVAC contractors and can confirm the right part for your model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold by licensed HVAC contractors.\u003c\/strong\u003e Furnace Direct is Hamlin Mechanical LLC, Minnesota licence #128688. If this part does not fix the problem, call (888) 762-1334 and we will help you work out what will.\u003c\/p\u003e","brand":"Furnace Direct","offers":[{"title":"Default Title","offer_id":58271379325231,"sku":"41-401","price":56.95,"currency_code":"USD","in_stock":true}]},{"product_id":"hot-surface-igniter-41-403","title":"Hot Surface Igniter | 41-403","description":"\u003cp\u003e\u003cstrong\u003eHot Surface Igniter\u003c\/strong\u003e — manufacturer part number \u003cstrong\u003e41-403\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat this part does\u003c\/h2\u003e\u003cp\u003eThe hot surface igniter glows red-hot to light the gas burners when your furnace calls for heat. When it cracks or burns out, the furnace runs its inducer and blower but never lights, so you get air movement and no heat.\u003c\/p\u003e\n\u003ch2\u003eReplace this part if\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFurnace runs but never ignites\u003c\/li\u003e\n\u003cli\u003eYou hear the inducer start, but no flame follows\u003c\/li\u003e\n\u003cli\u003eIgniter glows dim orange instead of bright white-orange\u003c\/li\u003e\n\u003cli\u003eIgniter is visibly cracked, chipped, or blistered white\u003c\/li\u003e\n\u003cli\u003eControl board flashes an ignition-failure or lockout code\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e41-403\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold By\u003c\/th\u003e\n\u003ctd\u003eFurnace Direct (Hamlin Mechanical LLC, MN Lic. #128688)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstall difficulty\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEasy\u003c\/strong\u003e — about 20 minutes. Tools: 1\/4\" nut driver, screwdriver. Power off at the breaker: yes. Gas shutoff required: no.\u003c\/p\u003e\n\u003cp\u003eTypical service life is 3-7 years. Most HVAC companies charge $250-350 to replace this part, including the service call.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I know if my hot surface igniter is bad?\u003c\/h3\u003e\u003cp\u003eReplace it if you see any of these: furnace runs but never ignites; you hear the inducer start, but no flame follows; igniter glows dim orange instead of bright white-orange.\u003c\/p\u003e\n\u003ch3\u003eCan I replace a hot surface igniter myself?\u003c\/h3\u003e\u003cp\u003eYes. This is a easy repair that takes about 20 minutes with 1\/4\" nut driver, screwdriver. Always shut the power off at the breaker first.\u003c\/p\u003e\n\u003ch3\u003eHow long does a hot surface igniter last?\u003c\/h3\u003e\u003cp\u003eTypically 3-7 years in normal residential use. Heavy cycling, poor airflow, and dirty filters all shorten that.\u003c\/p\u003e\n\u003ch3\u003eHow much does a contractor charge to replace a hot surface igniter?\u003c\/h3\u003e\u003cp\u003eMost HVAC companies charge $250-350 for this repair, including the service call. The part itself is $52.95.\u003c\/p\u003e\n\u003ch3\u003eHow fast does this ship?\u003c\/h3\u003e\u003cp\u003eOrders placed by 2 PM CT typically ship the same business day, with delivery in 1-5 business days.\u003c\/p\u003e\n\u003ch3\u003eWhat if it does not fit?\u003c\/h3\u003e\u003cp\u003eReturn it within 90 days. If you are unsure before ordering, call (888) 762-1334 — we are licensed HVAC contractors and can confirm the right part for your model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold by licensed HVAC contractors.\u003c\/strong\u003e Furnace Direct is Hamlin Mechanical LLC, Minnesota licence #128688. If this part does not fix the problem, call (888) 762-1334 and we will help you work out what will.\u003c\/p\u003e","brand":"Furnace Direct","offers":[{"title":"Default Title","offer_id":58271379357999,"sku":"41-403","price":52.95,"currency_code":"USD","in_stock":true}]},{"product_id":"hot-surface-igniter-41-405","title":"Hot Surface Igniter | 41-405","description":"\u003cp\u003e\u003cstrong\u003eHot Surface Igniter\u003c\/strong\u003e — manufacturer part number \u003cstrong\u003e41-405\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat this part does\u003c\/h2\u003e\u003cp\u003eThe hot surface igniter glows red-hot to light the gas burners when your furnace calls for heat. When it cracks or burns out, the furnace runs its inducer and blower but never lights, so you get air movement and no heat.\u003c\/p\u003e\n\u003ch2\u003eReplace this part if\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFurnace runs but never ignites\u003c\/li\u003e\n\u003cli\u003eYou hear the inducer start, but no flame follows\u003c\/li\u003e\n\u003cli\u003eIgniter glows dim orange instead of bright white-orange\u003c\/li\u003e\n\u003cli\u003eIgniter is visibly cracked, chipped, or blistered white\u003c\/li\u003e\n\u003cli\u003eControl board flashes an ignition-failure or lockout code\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e41-405\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold By\u003c\/th\u003e\n\u003ctd\u003eFurnace Direct (Hamlin Mechanical LLC, MN Lic. #128688)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstall difficulty\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEasy\u003c\/strong\u003e — about 20 minutes. Tools: 1\/4\" nut driver, screwdriver. Power off at the breaker: yes. Gas shutoff required: no.\u003c\/p\u003e\n\u003cp\u003eTypical service life is 3-7 years. Most HVAC companies charge $250-350 to replace this part, including the service call.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I know if my hot surface igniter is bad?\u003c\/h3\u003e\u003cp\u003eReplace it if you see any of these: furnace runs but never ignites; you hear the inducer start, but no flame follows; igniter glows dim orange instead of bright white-orange.\u003c\/p\u003e\n\u003ch3\u003eCan I replace a hot surface igniter myself?\u003c\/h3\u003e\u003cp\u003eYes. This is a easy repair that takes about 20 minutes with 1\/4\" nut driver, screwdriver. Always shut the power off at the breaker first.\u003c\/p\u003e\n\u003ch3\u003eHow long does a hot surface igniter last?\u003c\/h3\u003e\u003cp\u003eTypically 3-7 years in normal residential use. Heavy cycling, poor airflow, and dirty filters all shorten that.\u003c\/p\u003e\n\u003ch3\u003eHow much does a contractor charge to replace a hot surface igniter?\u003c\/h3\u003e\u003cp\u003eMost HVAC companies charge $250-350 for this repair, including the service call. The part itself is $52.95.\u003c\/p\u003e\n\u003ch3\u003eHow fast does this ship?\u003c\/h3\u003e\u003cp\u003eOrders placed by 2 PM CT typically ship the same business day, with delivery in 1-5 business days.\u003c\/p\u003e\n\u003ch3\u003eWhat if it does not fit?\u003c\/h3\u003e\u003cp\u003eReturn it within 90 days. If you are unsure before ordering, call (888) 762-1334 — we are licensed HVAC contractors and can confirm the right part for your model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold by licensed HVAC contractors.\u003c\/strong\u003e Furnace Direct is Hamlin Mechanical LLC, Minnesota licence #128688. If this part does not fix the problem, call (888) 762-1334 and we will help you work out what will.\u003c\/p\u003e","brand":"Furnace Direct","offers":[{"title":"Default Title","offer_id":58271379390767,"sku":"41-405","price":52.95,"currency_code":"USD","in_stock":true}]},{"product_id":"hot-surface-igniter-ssn3000","title":"Hot Surface Igniter | SSN3000","description":"\u003cp\u003e\u003cstrong\u003eHot Surface Igniter\u003c\/strong\u003e — manufacturer part number \u003cstrong\u003eSSN3000\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat this part does\u003c\/h2\u003e\u003cp\u003eThe hot surface igniter glows red-hot to light the gas burners when your furnace calls for heat. When it cracks or burns out, the furnace runs its inducer and blower but never lights, so you get air movement and no heat.\u003c\/p\u003e\n\u003ch2\u003eReplace this part if\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFurnace runs but never ignites\u003c\/li\u003e\n\u003cli\u003eYou hear the inducer start, but no flame follows\u003c\/li\u003e\n\u003cli\u003eIgniter glows dim orange instead of bright white-orange\u003c\/li\u003e\n\u003cli\u003eIgniter is visibly cracked, chipped, or blistered white\u003c\/li\u003e\n\u003cli\u003eControl board flashes an ignition-failure or lockout code\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eSSN3000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold By\u003c\/th\u003e\n\u003ctd\u003eFurnace Direct (Hamlin Mechanical LLC, MN Lic. #128688)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstall difficulty\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEasy\u003c\/strong\u003e — about 20 minutes. Tools: 1\/4\" nut driver, screwdriver. Power off at the breaker: yes. Gas shutoff required: no.\u003c\/p\u003e\n\u003cp\u003eTypical service life is 3-7 years. Most HVAC companies charge $250-350 to replace this part, including the service call.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eHow do I know if my hot surface igniter is bad?\u003c\/h3\u003e\u003cp\u003eReplace it if you see any of these: furnace runs but never ignites; you hear the inducer start, but no flame follows; igniter glows dim orange instead of bright white-orange.\u003c\/p\u003e\n\u003ch3\u003eCan I replace a hot surface igniter myself?\u003c\/h3\u003e\u003cp\u003eYes. This is a easy repair that takes about 20 minutes with 1\/4\" nut driver, screwdriver. Always shut the power off at the breaker first.\u003c\/p\u003e\n\u003ch3\u003eHow long does a hot surface igniter last?\u003c\/h3\u003e\u003cp\u003eTypically 3-7 years in normal residential use. Heavy cycling, poor airflow, and dirty filters all shorten that.\u003c\/p\u003e\n\u003ch3\u003eHow much does a contractor charge to replace a hot surface igniter?\u003c\/h3\u003e\u003cp\u003eMost HVAC companies charge $250-350 for this repair, including the service call. The part itself is $101.95.\u003c\/p\u003e\n\u003ch3\u003eHow fast does this ship?\u003c\/h3\u003e\u003cp\u003eOrders placed by 2 PM CT typically ship the same business day, with delivery in 1-5 business days.\u003c\/p\u003e\n\u003ch3\u003eWhat if it does not fit?\u003c\/h3\u003e\u003cp\u003eReturn it within 90 days. If you are unsure before ordering, call (888) 762-1334 — we are licensed HVAC contractors and can confirm the right part for your model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold by licensed HVAC contractors.\u003c\/strong\u003e Furnace Direct is Hamlin Mechanical LLC, Minnesota licence #128688. If this part does not fix the problem, call (888) 762-1334 and we will help you work out what will.\u003c\/p\u003e","brand":"Furnace Direct","offers":[{"title":"Default Title","offer_id":58271379423535,"sku":"SSN3000","price":101.95,"currency_code":"USD","in_stock":true}]}],"url":"https:\/\/furnace.direct\/es\/collections\/hot-surface-igniters\/4-ton.oembed","provider":"Furnace Direct","version":"1.0","type":"link"}