Stewart is a small McLeod County community along U.S. Highway 212, situated in the heart of Minnesota’s agricultural southwest. Winters here are full Prairie Minnesota—cold, windy, and long—with January lows regularly reaching −15°F or colder. When your furnace fails in Stewart, you need a replacement fast. Furnace Direct delivers factory-direct Goodman furnaces to Stewart with same-day delivery and near-wholesale pricing that saves local homeowners $400–$900 on equipment.
2026 Furnace Replacement Costs for Stewart, MN
| Home Size | Furnace BTU | Equipment Only | Installed Estimate |
|---|---|---|---|
| Under 1,000 sq ft | 40,000–60,000 BTU | $700–$1,100 | $1,800–$2,800 |
| 1,000–1,600 sq ft | 60,000–80,000 BTU | $900–$1,400 | $2,200–$3,400 |
| 1,600–2,400 sq ft | 80,000–100,000 BTU | $1,100–$1,700 | $2,800–$4,200 |
| 2,400+ sq ft | 100,000–120,000 BTU | $1,400–$2,200 | $3,400–$5,500 |
Some rural Stewart properties use propane. Furnace Direct stocks Goodman LP-compatible furnaces for homes without natural gas service.
Reliable Heating for McLeod County’s Rural Communities
Stewart’s rural setting means homes here often have higher heating loads than comparably sized suburban properties—older construction, more exterior exposure, and sometimes propane fuel. Goodman’s lineup covers natural gas and LP configurations across all efficiency tiers, and Furnace Direct stocks both to ensure Stewart homeowners get the right equipment for their installation. High-efficiency models rated 96%–97% AFUE dramatically reduce fuel waste during McLeod County’s long heating season.
Factory-Direct Pricing for Small-Town Minnesota
Rural homeowners shouldn’t have to pay metro premiums for furnace equipment. Furnace Direct ships Goodman furnaces directly to Stewart at near-wholesale pricing—no distributor markup, no retail overhead. You save $400–$900 on equipment and hire your preferred local contractor for installation at their standard labor rate. Same Goodman quality, same manufacturer warranty, significantly better price.
Same-Day Delivery to Stewart and McLeod County
Stewart is within Furnace Direct’s same-day delivery coverage area in McLeod County. Order in-stock Goodman furnaces early in the morning for same-day delivery. For winter furnace failures in rural McLeod County, this delivery speed means the difference between one cold night and multiple days without heat while waiting for equipment to ship.
Frequently Asked Questions: Furnace Replacement in Stewart, MN
How much does furnace replacement cost in Stewart, MN?
Complete furnace replacement in Stewart typically runs $1,800–$5,500 including equipment and installation. Factory-direct purchasing from Furnace Direct saves $400–$900 on equipment compared to traditional contractor pricing.
Does Furnace Direct carry LP furnaces for Stewart propane homes?
Yes. Furnace Direct stocks Goodman LP-compatible furnaces with the same high-efficiency ratings and manufacturer warranties as natural gas models—ideal for rural Stewart properties on propane.
What furnace size does a Stewart home need?
Most Stewart homes fall in the 60,000–100,000 BTU range. Rural and older properties may require higher-capacity units. A Manual J load calculation by your HVAC installer ensures accurate sizing.
Does Furnace Direct deliver to Stewart?
Yes. Stewart is within Furnace Direct’s same-day delivery area in McLeod County. In-stock models can arrive the same day when ordered early in the morning.
What AFUE rating is best for Stewart’s climate?
A 96%–97% AFUE Goodman furnace is recommended for Stewart’s cold Prairie winters. The efficiency premium over an 80% unit pays back in 4–8 years, with rural homes often seeing faster payback due to higher heating loads.
Get wholesale pricing on a new system.
Tell us a little about your home and what you're replacing. We'll send real numbers on a Goodman 96% AFUE setup — shipped direct to your door anywhere in the lower 48. No contractor markup, no obligation.