Home› Blog› American Standard Model Number Lookup: How to Read Americ...
Wholesale HVAC Direct

American Standard Model Number Lookup: How to Read American Standard Furnace and AC Model Numbers

Published September 14, 2026· Last updated September 23, 2026· 4 min read
Need to replace your system? We're here to help. Talk to a specialist →

American Standard equipment comes off the same lines as Trane, so its model numbers follow the same logic. The furnace numbers are identical; the outdoor-unit numbers swap in an A for the brand and use different family letters. This guide decodes American Standard furnace and air-conditioner model numbers position by position, using the key American Standard prints on its own product data sheets.

American Standard and Trane are the same company. Silver, Gold and Platinum are the American Standard tier names for what Trane calls XR, XL and XV. For the Trane family names see the Trane model number guide.

Where to Find the American Standard Model Number

On a furnace, the rating plate is inside the front door or on the side of the cabinet, usually a foil or paper label with the model (M/N) and serial (S/N) side by side. On an outdoor AC or heat pump it is on the side of the condenser near the refrigerant line connections. Copy the model number exactly as printed, including dashes: the position of each character is what carries the meaning.

American Standard Furnace Model Number Format

A typical American Standard furnace model number looks like: S9V2B080U4PSAA. Use the table to split it up:

Position Characters Meaning Example
Series S S = current S-series gas furnace (legacy units start with A, e.g. AUD, AUH) S
AFUE family 9 9 = 90%+ condensing; 8 = 80% 9 (96% AFUE on S9V2)
Stages / motor V2 V2 = two-stage with variable-speed ECM; X2 = two-stage ECM; X1 = single-stage ECM; B1 = single-stage V2
Cabinet width B B = 17.5 in.; C = 21 in.; D = 24.5 in. 17.5 in. wide
Heating input 080 Thousands of BTU/h: 040, 060, 080, 100, 120 80,000 BTU/h
Airflow direction U U = upflow / horizontal; D = downflow U (upflow)
Blower capacity 4 Nominal cooling tons the blower supports: 3, 4, 5 4 tons
Configuration PS Manufacturer configuration code (not defined on the product data sheet) PS
Revision AA Design revision (AA, BB...) AA
Furnace Direct · Factory-Direct Pricing
Why pay a contractor's markup?

Buy the same name-brand HVAC system the pros install — shipped factory-direct to your door. No middleman, 5-star rated, and financing available.

Common American Standard Furnace Families

The first few characters identify the family, and the family tells you the tier, staging and blower before you read a single digit of capacity.

Model prefix Family Stages Blower Efficiency
S9V2 Gold / Platinum S9V2 Two-stage Variable-speed ECM 96-97% AFUE
S9X2 Gold S9X2 Two-stage Constant-torque ECM 96% AFUE
S9X1 Silver S9X1 Single-stage Constant-torque ECM 96% AFUE
S9B1 Silver S9B1 Single-stage Multi-speed 96% AFUE
S8X1 / S8B1 Silver 80 families Single-stage ECM / multi-speed 80% AFUE
AUD / AUH / ADH Legacy Freedom 80 / 90 series Varies Varies 80-95% AFUE

American Standard AC and Heat Pump Model Numbers

Outdoor units use a different string. A typical American Standard air conditioner model number looks like: 4A7A6036A1000A.

Position Characters Meaning Example
Refrigerant 4 4 = R-410A (2 = R-22 on older units) 4
Brand A A = American Standard; T = Trane A
Product type 7 7 = split-system air conditioner; 6 = split-system heat pump 7 (AC)
Family A A = Silver and Gold single-stage families; V = Platinum variable-speed (letters vary by generation) A
SEER digit 6 3 = 13, 4 = 14, 5 = 15, 6 = 16, 7 = 17, 8 = 18, 0 = 20 16 SEER
Connections 0 0 = brazed 0
Cooling capacity 36 Thousands of BTU/h; divide by 12 for tons 36,000 BTU/h = 3 tons
Major design A Design generation letter A
Power supply 1 1 = 208/230 V single-phase 208/230-1
Secondary function / revision 000A Manufacturer function code plus minor design revision 000A

American Standard Tonnage by Model Number

Every American Standard outdoor unit carries its cooling capacity as a two- or three-digit BTU code. Divide by 12 to get tons (1 ton = 12,000 BTU/h). Furnace numbers carry the gas input instead, so a "080" on a furnace means 80,000 BTU/h of heating, not 80,000 BTU/h of cooling.

Model code Size Cooling capacity
018 1.5 ton 18,000 BTU/h
024 2 ton 24,000 BTU/h
030 2.5 ton 30,000 BTU/h
036 3 ton 36,000 BTU/h
042 3.5 ton 42,000 BTU/h
048 4 ton 48,000 BTU/h
060 5 ton 60,000 BTU/h

Common American Standard outdoor families and where they sit:

Model prefix Family Efficiency
4A7A4 / 4A7A6 Silver 14 / Silver 16 14-16 SEER
4A7A7 Gold 17 17 SEER
4A7V0 Platinum 20 variable-speed Up to 22 SEER
4A6H / 4A6V Silver, Gold and Platinum heat pumps 14-20 SEER

What the American Standard Model Number Does Not Tell You

The model number says nothing about the unit's age. That is in the serial number, and American Standard has changed its serial date format more than once. Use the American Standard serial number lookup to turn a serial into a manufacture date, or the HVAC serial number decoder hub for any other brand. The model number also does not tell you whether the unit was installed and charged correctly, which matters as much as the SEER digit for what it actually costs to run.

Decoded Your American Standard? Here Is What to Do With It

If the unit is under 10 years old and the model number shows a mid- or high-efficiency family, it is usually worth repairing. If the serial dates it past 12 to 15 years for an AC or 15 to 20 years for a furnace, the capacity and cabinet width you just decoded are exactly what you need to size a replacement. A new system at the same tonnage and input will drop straight into the same duct and gas connections.

Time to replace it? Furnace Direct sells factory-direct AC, furnace and heat pump systems sized by the same BTU and tonnage codes you just decoded. Shop factory-direct systems → or match your exact unit with the furnace model lookup tool.

Related: Goodman vs American Standard furnace comparison · how to read any furnace data label · Goodman model number decoder.

★ Wholesale HVAC Direct

Get your system replaced.

Tell us a little about your home and what you're replacing. A specialist will call you to work out exactly what you need, go over the price, and get it replaced. No obligation.

What are you looking to replace?

★ 5.0 rating from real customers ★ Fast freight shipping nationwide ★ Factory-sealed with full warranty
Prefer to talk first? Call (888) 762-1334 — 9 AM–7 PM ET, Monday–Saturday.